Modular Switch Actuator for use with Rocker Switch

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Coloured Rocker Switches, Contura Series

IP68 rating if used without panel assembly system
These switches are terminated with 6.35mm fast-on terminals and are supplied with a panel-sealing gasket
Illuminated versions are available with a choice of 250V neon or red or green LEDs with integral resistors for 12V operation
Also available is a bezeled panel assembly system which permits sub-assemblies to be snapped into place (system does not have IP68 rating)
Contact resistance: 10mΩ
Contact material: Silver
Panel cut-out: 21.08 x 36.83

Note

Switch supplied without actuator, see stk. no 665-528 etc typically
The black/green lens actuator 665-556 is not suitable for use with neon or red LED illuminated switches

Approvals

UL; CSA; VDE; BEAB; DEMKO; SEMKO; NEMKO; FIMKO

Specificaties
Kenmerk Waarde
Accessory Type Actuator
For Use With Rocker Switch
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
118 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,45
(excl. BTW)
4,17
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 3,45
25 - 99
€ 3,21
100 - 249
€ 1,68
250 - 499
€ 1,63
500 +
€ 1,52
Related Products
Raised and Recessed, Rocker and Piano actuator stylesSealed ...
Description:
Raised and Recessed, Rocker and Piano actuator stylesSealed base as standardSpring and ball contacts.
Rocker Switch Actuators designed as an accessory for ...
Description:
Rocker Switch Actuators designed as an accessory for various switches.
A range of accessories are available to suit ...
Description:
A range of accessories are available to suit the Carling Technologies V Series Contura rocker switches. These include mounting panels, actuator removal tools which when used can accommodate most of any design needed.
End and middle panels housings, which dovetail into ...
Description:
End and middle panels housings, which dovetail into each other, enable a side stacked cluster of KR rocker switch cases, to be assembled and positioned into a long panel slotFor mounting end panel housing order RS507-611 and for middle panel ...