Broyce Control Voltage Monitoring Relay With DPDT Contacts, 3 Phase, 400 V

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

LPRT/2 Phase Failure, Phase Sequence, Under Voltage plus Time Delay

Broyce Controls L-Series signal conditioners use a QR barcode marking method allowing direct access to all technical data sheets, ensuring correct information is always at your finger tips!

Features and Benefits

Compact 17.5 mm DIN Rail housing Microprocessor based
True R.M.S. monitoring measuring phase to phase (three wire) or phase to neutral (4-wire) voltages
Selectable nominal voltages to suit most popular three wire or 4-wire supply voltages
Monitors own supply and detects an Under voltage condition on one or more phases
Detects incorrect phase sequence, phase loss and neutral loss1
Adjustment for Under voltage trip level
Adjustment for time delay
DPDT relay output 5A
Green LED indication for supply status
Red LED indication for relay status

Approvals

UL Certification

Broyce Monitor Relays

Relay controllers manufactured using flame retardant material to UL94 VO
Electrical life: ≥150 000 operations
Suitable for use within ambient temperature environments from -20 to +60°C (except stock no. 361-1710 and 361-1681 which are suitable from -20 to +50°C)

Note

Output relay contact rating specified at 250Vac

Specificaties
Kenmerk Waarde
Monitoring Application Voltage
Supply Voltage 400 V
Contact Configuration DPDT
Electrical Phase 3
Voltage Sensing Range 243 → 540 V
Phase Sensitivity Phase Failure, Phase Sequence
Time Delay 0.2 → 10 s
Width 17.5mm
Minimum Voltage Sensed 243 V
Operating Temperature Range -20 → +60 °C
Terminal Type Wire Lead
Mounting Type DIN Rail
Maximum Voltage Sensed 540V
Height 66.5mm
Length 89mm
Minimum Operating Temperature -20°C
Special Features Adjustment For Time Delay, Adjustment For Under Voltage Trip Level, Detects Incorrect Phase Sequence, Microprocessor Based, Phase Loss And Neutral Loss
Dimensions 89 x 17.5 x 66.5 mm
Standards Met CE, EN 61000-6-2, EN 61000-6-4, IEC, RoHS Complaint
Maximum Operating Temperature +60°C
15 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
97,01
(excl. BTW)
117,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 97,01
Related Products
Omron K8DT-AS/AW single phase current relays detect errors ...
Description:
Omron K8DT-AS/AW single phase current relays detect errors in motors and other equipment through current changes. Monitor AC or DC currents with one Relay.Use with commercially available current transformersWidth of 17.5 mm to reduce space required in panels.Push-In Plus Terminal ...
Omron K8DT-VS single phase voltage monitor relay detects ...
Description:
Omron K8DT-VS single phase voltage monitor relay detects abnormal voltages applies to equipment to protect against equipment failure. Can be used in either overvoltage or undervoltage mode. Monitor AC or DC currents with one Relay.Settings for the operating value, hysteresis, ...
Omron K8DT-LS conductive level controllers are Ideal for ...
Description:
Omron K8DT-LS conductive level controllers are Ideal for water level control. Offering sensitivity adjustment and an ON-delay timer that is ideal as a countermeasure for waves on liquid surfaces. Sensitivity adjustment from 10 k to 100 kΩ.Easy onsite adjustmentON-delay timer ...
Omron K8DT-TH temperature monitoring relay, ideal to prevent ...
Description:
Omron K8DT-TH temperature monitoring relay, ideal to prevent heater overheating. Featuring a self-latching output to contribute to safe equipment operation. Set the temperature with simple rotary switchesConnect a thermocouple or platinum resistance thermometer.Width of 17.5 mm to reduce space required ...