ABB Temperature Monitoring Relay, SPDT, DIN Rail
- RS-stocknr.:
- 876-4985
- Fabrikantnummer:
- 1SVR730720R1400 CM-MSS.11S
- Fabrikant:
- ABB
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 121,55
(excl. BTW)
€ 147,08
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 121,55 |
- RS-stocknr.:
- 876-4985
- Fabrikantnummer:
- 1SVR730720R1400 CM-MSS.11S
- Fabrikant:
- ABB
Wetgeving en compliance
Productomschrijving
ABB Monitoring Relay, Overtemperature Monitoring, Screw Terminals - CM-MSS Series - 1SVR730720R1400 CM-MSS.11S
Make sure your equipment doesn't lose its cool with this monitoring relay from ABB. Its built-in thermistor monitors thermal energy build-up in your system and steps in to prevent overheating. As it also protects against short circuits and detects broken wires, this device is an all-rounder that minimises the risk of damage to your machinery. Screw terminals make it a cinch to wire up using a screwdriver, so you're not driven round the twist during set-up.
Features & Benefits
• Snaps onto a DIN rail for ease of installation
• Broad operating temperature range between -25°C and +60°C for use in harsh industrial environments
• Compact dimensions of 103.7 (L) x 22.5 (W) x 85.6mm (H) to fit in space-tight areas
• Mechanical lifespan of 30 million cycles for long-lasting performance
• Housing has an IP50 rating that indicates some protection from dust
• Broad operating temperature range between -25°C and +60°C for use in harsh industrial environments
• Compact dimensions of 103.7 (L) x 22.5 (W) x 85.6mm (H) to fit in space-tight areas
• Mechanical lifespan of 30 million cycles for long-lasting performance
• Housing has an IP50 rating that indicates some protection from dust
Applications
• Construction industry
• Industrial automation
• Factory power supplies
• Industrial automation
• Factory power supplies
Can I use this device in explosive environments?
Yes, this item is safe for use in explosive atmospheres, so you can use it in volatile workspaces.
Specificaties
Kenmerk | Waarde |
|---|---|
| Monitoring Application | Temperature |
| Contact Configuration | SPDT |
| Mounting Type | DIN Rail |
| Time Delay | <100ms |
| Temperature Sensitivity | Overtemperature, Winding Temperature |
| Hazardous Area Certification | ATEX |
| Series | CM-MSS |
| Maximum Voltage Sensed | 240V dc |
| Terminal Type | Screw |
| Standards Met | UL |
| Minimum Operating Temperature | -25°C |
| Width | 22.5mm |
| Maximum Operating Temperature | +60°C |
| Dimensions | 103.7 x 22.5 x 85.6mm |
| Current Range | Maximum of 3.7mA |
| Special Features | Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, Manual & Automatic Reset, Non-Volatile Fault Storage, One Measuring Circuit, Over Heating Protection, Over Load Protection, Remote Reset, Short-Circuit Monitoring of the Sensor Circuit |
| Height | 85.6mm |
| Length | 103.7mm |
| Minimum Voltage Sensed | 24V dc |
| Operating Temperature Range | -25 → +60°C |