Infineon IR2130PBF Hex MOSFET Power Driver, 0.5A, 10 → 20 V 28-Pin, PDIP

  • RS-stocknr. 300-199
  • Fabrikantnummer IR2130PBF
  • Fabrikant Infineon
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MOSFET & IGBT Gate Drivers, Three-Phase, Infineon

A range of full-bridge drivers designed to control MOSFET and IGBT power devices in 3-phase applications. The devices feature a maximum blocking voltage of 600 V and low-side control using CMOS and TTL compatible signal levels.

MOSFET & IGBT Drivers, Infineon (International Rectifier)

Specificaties
Kenmerk Waarde
Number of Drivers 6
Minimum Operating Supply Voltage 10 V
Maximum Operating Supply Voltage 20 V
Topology High and Low Side
Mounting Type Through Hole
Peak Output Current 0.5A
Number of Outputs 6
Polarity Inverting
Package Type PDIP
Pin Count 28
Bridge Type Three Phase
Input Logic Compatibility CMOS, LSTTL
High and Low Sides Dependency Independent
Dimensions 39.75 x 14.73 x 6.35mm
Length 39.75mm
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Width 14.73mm
Height 6.35mm
41 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
108 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
8,92
(excl. BTW)
10,79
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 8,92
10 - 19
€ 7,55
20 +
€ 6,56
Related Products
Power supply voltage monitoring and supervisory circuits for ...
Description:
Power supply voltage monitoring and supervisory circuits for use in desktop, laptop and notebook computers, test and measurement instruments, portable battery-powered equipment and multiple-output power supplies. Supply Voltage DetectorSupply Voltage SupervisorPower Supply SupervisorMicroprocessor ...
The DRDC3105 is an integrated solid-state DC relay ...
Description:
The DRDC3105 is an integrated solid-state DC relay driver that can switch inductive loads. The driver interfaces between sensitive logic circuits and 3 V to 6 V dc inductive relay coils. Low input drive currentTransient isolation between output and inputOpen-circuit ...
The MCP14A0303/4/5 devices are dual output high-speed MOSFET ...
Description:
The MCP14A0303/4/5 devices are dual output high-speed MOSFET drivers that are capable of providing up to 3.0A of peak current while operating from a single 4.5V to 18V supply. There are three output configurations available: inverting (MCP14A0303), non-inverting (MCP14A0304), and ...
The MIC4123/4124/4125 family are highly reliable BiCMOS/DMOS buffer/driver/MOSFET ...
Description:
The MIC4123/4124/4125 family are highly reliable BiCMOS/DMOS buffer/driver/MOSFET drivers. They are higher output current versions of the MIC4126/4127/4128, which are improved versions of the MIC4426/4427/4428. All three families are pin-compatible. Reliable, low-power bipolar/CMOS/DMOS constructionLatch-up ...