Linear Technology LTC4444EMS8E#PBF Dual High Side MOSFET Power Driver, 3A 8-Pin, MSOP

  • RS-stocknr. 155-9343
  • Fabrikantnummer LTC4444EMS8E#PBF
  • Fabrikant Analog Devices
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MOSFET & IGBT Drivers, Linear Technology

Linear Technology's MOSFET (FET) drivers provide a straight forward way to drive single, dual, triple or quad N-Channel and P-Channel FETs.

Wide Input range of operation
Extended Temperature range of operation
Powerful gate drive
Short circuit protection

MOSFET & IGBT Drivers, Linear Technology

Specificaties
Kenmerk Waarde
Number of Drivers 2
Minimum Operating Supply Voltage 7.2 V
Maximum Operating Supply Voltage 13.5 V
Topology High Side
Mounting Type Surface Mount
Peak Output Current 3A
Number of Outputs 1
Polarity Non-Inverting
Package Type MSOP
Pin Count 8
Input Logic Compatibility CMOS
High and Low Sides Dependency Synchronous
Minimum Operating Temperature -40 °C
Width 3mm
Length 3mm
Height 0.86mm
Dimensions 3 x 3 x 0.86mm
Maximum Operating Temperature +125 °C
100 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 50)
2,415
(excl. BTW)
2,922
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
50 +
€ 2,415
€ 120,75
*prijsindicatie
Related Products
The Semikron SKYPER® 12 press-fit modules are IGBT ...
Description:
The Semikron SKYPER® 12 press-fit modules are IGBT drivers for SEMIX Press-fit and Econodual Press-fit IGBT modules. The half-bridge driver boards can be mounted directly onto 17mm press-fit modules. With 30% fewer components than other plug-and-play solutions, these drivers achieve ...
The Semikron Board 1 SKYPER® 32 R is ...
Description:
The Semikron Board 1 SKYPER® 32 R is an adaptor board for the IGBT driver module allowing customisation to suit the specific IGBT output module used. The switching characteristics of the IGBTs can be influenced through user selection of the ...
Gate Driver ICs from Infineon to control MOSFET ...
Description:
Gate Driver ICs from Infineon to control MOSFET or IGBT power devices in high-side and low-side configurations.
The MCP14A0303/4/5 devices are dual output high-speed MOSFET ...
Description:
The MCP14A0303/4/5 devices are dual output high-speed MOSFET drivers that are capable of providing up to 3.0A of peak current while operating from a single 4.5V to 18V supply. There are three output configurations available: inverting (MCP14A0303), non-inverting (MCP14A0304), and ...