Infineon IRS2003SPBF Dual Half Bridge MOSFET Power Driver, 0.6A 8-Pin, SOIC

  • RS-stocknr. 178-1517
  • Fabrikantnummer IRS2003SPBF
  • Fabrikant Infineon
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MOSFET & IGBT Gate Drivers, Half-Bridge, Infineon

Gate Driver ICs from Infineon to control MOSFET or IGBT power devices in half bridge configurations.

MOSFET & IGBT Drivers, Infineon (International Rectifier)

Specificaties
Kenmerk Waarde
Number of Drivers 2
Minimum Operating Supply Voltage 10 V
Maximum Operating Supply Voltage 20 V
Topology Half Bridge
Mounting Type Surface Mount
Peak Output Current 0.6A
Number of Outputs 2
Polarity Inverting, Non-Inverting
Package Type SOIC
Pin Count 8
Bridge Type Half Bridge
Input Logic Compatibility CMOS, LSTTL
High and Low Sides Dependency Synchronous
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Length 5mm
Width 4mm
Height 1.5mm
Dimensions 5 x 4 x 1.5mm
95 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 95)
0,676
(excl. BTW)
0,818
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
95 +
€ 0,676
€ 64,22
*prijsindicatie
Related Products
A range of full-bridge drivers designed to control ...
Description:
A range of full-bridge drivers designed to control MOSFET and IGBT power devices in 3-phase applications. The devices feature a maximum blocking voltage of 600 V and low-side control using CMOS and TTL compatible signal levels.
Capable of driving the gates of N-channel MOSFETs ...
Description:
Capable of driving the gates of N-channel MOSFETs and IGBTs in a half-bridge configuration. The half-bridge circuit consists of upper and lower MOSFETs connected in a cascode arrangement. The two MOSFET switches are turned on and off complementary to each ...
Power drivers for MOSFET and IGBT in low ...
Description:
Power drivers for MOSFET and IGBT in low side, high side, and half-bridge circuits.
The MIC4605 is an 85V half-bridge MOSFET driver ...
Description:
The MIC4605 is an 85V half-bridge MOSFET driver that features adaptive-dead-time and shoot-through protection. The adaptive-dead-time circuitry actively monitors the half-bridge outputs to minimize the time between high-side and low-side MOSFET transitions, thus maximizing power efficiency. 5.5V to 16V gate ...