Baumer GI342 Series Optical Incremental Encoder, 1000 ppr, HTL/Push Pull Signal, Hollow Type, 12mm Shaft
- RS-stocknr.:
- 150-401
- Fabrikantnummer:
- GI342.N707122000
- Fabrikant:
- Baumer
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 150-401
- Fabrikantnummer:
- GI342.N707122000
- Fabrikant:
- Baumer
Datasheets
Wetgeving en compliance
- Land van herkomst:
- DE
Productomschrijving
GI342 series hollow shaft Ø 58 encoders
Carbon-fibre reinforced polyamide housing.
Extended voltage supply range from 4.75 → 30 Vdc
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 5000 pulses / turn.
Output signals A; A/; B; B/; Zero pulse; Zero pulse/.
Hollow shaft encoders for direct mounting onto the end of a motor shaft, bored hole Ø 12 mm H7.
Clamping ring on flange, spring anti-rotation coupling supplied with the encoder.
E-connection with 1 metre shielded cable.
Application: robotics, metal or wood working, paper, textiles, packing machinery.
Extended voltage supply range from 4.75 → 30 Vdc
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 5000 pulses / turn.
Output signals A; A/; B; B/; Zero pulse; Zero pulse/.
Hollow shaft encoders for direct mounting onto the end of a motor shaft, bored hole Ø 12 mm H7.
Clamping ring on flange, spring anti-rotation coupling supplied with the encoder.
E-connection with 1 metre shielded cable.
Application: robotics, metal or wood working, paper, textiles, packing machinery.
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Short circuit protection
Age and temperature compensation
Specificaties
Kenmerk | Waarde |
|---|---|
| Encoder Technology | Optical |
| Pulses Per Revolution | 1000 |
| Series | GI342 |
| Maximum Revolutions | 6000rpm |
| Output Signal Type | HTL/Push Pull |
| Shaft Type | Hollow |
| Supply Voltage | 4.75 → 30 V dc |
| Shaft Diameter | 12mm |
| IP Rating | IP54 |
| Overall Width | 58mm |
| Minimum Operating Temperature | -20°C |
| Mounting Type | Through Hollow Shaft Flange |
| Maximum Operating Temperature | +85°C |
| Switching Frequency | ≤150 kHz |
| Connection Type | Cable output 1 m |