DFRobot DFR0351 Romeo BLE mini DC Controller Board for ATmega328P, TI CC2540 for Robotic Applications

  • RS-stocknr. 124-4688
  • Fabrikantnummer DFR0351
  • Fabrikant DFRobot
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Romeo BLE Mini Arduino Motor Drive Board

Romeo BLE mini is small Arduino Robot Control Board with motor driver and CC2540 Bluetooth 4.0 (BLE) chip. The board benefits from the Arduino open source platform and includes open source codes. With the integrated 2 way DC motor driver, projects can be started without any additional motor driver shield.

Features:
On-board BLE chip: TI CC2540
Transmission range: <30 m
Easy to use BLE firmware updating
Wireless Programming Via BLE
Support Bluetooth HID
Support AT command to config the BLE
Support the master-salve machine switch
Transparent communication through Serial
Microcontroller: Atmega328p
Bootloader: Arduino UNO
8 Digital I/O ports
2 PWM Outputs(Pin11,Pin10)
4 10-bit analogue input ports
USB port
Auto sensing/switching external power input
TTL I2C ICSP interfaces
2 way H-bridged Motor Driver with 1.5A maximum current (each one)
Size: 45 x 38.5 mm(1.77 x 1.52")

Romeo family

Specificaties
Kenmerk Waarde
Kit Name Romeo BLE mini
Kit Classification Controller Board
For Use With Robotic Applications
Motor Type DC
Featured Device ATmega328P, TI CC2540
140 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
23,13
(excl. BTW)
27,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 23,13
Related Products
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control ...
The STEVAL-IPMNG3Q is a compact 3-phase ac motor ...
Description:
The STEVAL-IPMNG3Q is a compact 3-phase ac motor driver board based on a SLLIMM™-nano (Small Low-Loss Intelligent Moulded Module) 2nd series device. It is designed for driving high-power motors in a wide range of applications such as white goods, air-conditioning, ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in ...
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC ...
Description:
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC motor driver expansion board based on the STSPIN240 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery ...