- RS-stocknr.:
- 124-5528
- Fabrikantnummer:
- 2927
- Fabrikant:
- ADAFRUIT INDUSTRIES
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 23,49
(excl. BTW)
€ 28,42
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 23,49 |
5 - 9 | € 20,99 |
10 + | € 18,80 |
- RS-stocknr.:
- 124-5528
- Fabrikantnummer:
- 2927
- Fabrikant:
- ADAFRUIT INDUSTRIES
Wetgeving en compliance
- Land van herkomst:
- US
Productomschrijving
DC Motor / Stepper Motor FeatherWing
FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.
The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.
You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.
The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.
You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.
- 4 full H-Bridges with 1.2A per bridge complete with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5 V dc to 13.5 V dc.
- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Motors automatically disabled on power-up
- 3.5 mm terminal block connectors (18-26 AWG)
- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"
- Weight: 4.6 g
- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Motors automatically disabled on power-up
- 3.5 mm terminal block connectors (18-26 AWG)
- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"
- Weight: 4.6 g
Adafruit FeatherWing Add-On Boards
Specificaties
Kenmerk | Waarde |
---|---|
For Use With | All Feather Board |
Kit Classification | Add On Board |
Featured Device | ATmega32u4, ATSAM M0, ESP8266 |
Kit Name | FeatherWing Add-On Board |
- RS-stocknr.:
- 124-5528
- Fabrikantnummer:
- 2927
- Fabrikant:
- ADAFRUIT INDUSTRIES