STMicroelectronics STEVAL-ESC001V1 STEVAL BLDC Evaluation Board for L6398, STL160NS3LLH7, STM32F303

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

STEVAL-ESC001V1 BLDC/PMSM Motor Speed Controller

The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control applications like electric cars, boats and UAV drones.

Board Features

• 72MHz STM32F303CBT7 Cortex-M4F MCU with 128KB Flash memory, 32KB RAM • 3 x L6398D High Side/Low Side MOSFET gate drivers
• 6 x STL160NS3LLH7 power MOSFETs configured as 3 x Half-Bridges
• Maximum RMS output current: 20A
• Current-sensing circuits
• Phase-sensing circuit
• Host communication: serial UART, I²C, CAN
• On-board SN65HVD230 CAN bus transceiver
• 2 x User LEDs
• Battery Eliminator Circuit (BEC) provides +5V power to R/C receiver and servomotors
• Test points for DAC, GPIOs, PWM signals, motor current feedback and CAN
• Connector for ST-LINK/V2 Program/Debug tool
• Dimensions: 29.1 x 58mm
• Designed for Field Oriented Control (FOC) in sensorless mode
• Supported by ST motor control software development kit (SDK)
• Ready to use with ST motor profiler
• 3-shunt mode supported for motor current sensing

Board Protection

• Cross conduction protection based on L6398 driver • Overcurrent and overvoltage protection feature (OCP/OVP)
• Thermal measuring and overheating protection with on-board NTC

Motor Controllers & Drivers, STMicroelectronics

Specificaties
Kenmerk Waarde
Kit Name STEVAL
Kit Classification Evaluation Board
For Use With L6398, STL160NS3LLH7, STM32F303
Motor Type BLDC
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
41,81
(excl. BTW)
50,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 41,81
Related Products
The first Romeo Arduino Control Board with Motor ...
Description:
The first Romeo Arduino Control Board with Motor Drivers is based on the Arduino Uno with a socket to add bluetooth APC220 Radio Communication Module. Also the controller board has integrated input/output sensor pinout for connecting gravity compatible sensors and ...
The STEVAL-IPMNG3Q is a compact 3-phase ac motor ...
Description:
The STEVAL-IPMNG3Q is a compact 3-phase ac motor driver board based on a SLLIMM™-nano (Small Low-Loss Intelligent Moulded Module) 2nd series device. It is designed for driving high-power motors in a wide range of applications such as white goods, air-conditioning, ...
The STEVAL-IPM08B compact motor drive power board is ...
Description:
The STEVAL-IPM08B compact motor drive power board is based on SLLIMM™ (small low-loss intelligent molded module) 2nd series module ( STGIB8CH60TS-L). It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such ...
Description:
The H-Bridge Kit 2GO is a ready to use evaluation kit. It is fully populated with all electronic components equipped with the H-Bridge IFX9201 combined with XMC 1100 Micro controller based on ARM® Cortex®-M0 CPU. Realize your own DC motor ...