ON Semiconductor LB1909MCGEVB Stepper Motor Driver IC Evaluation Board Stepper Evaluation Board for LB1909MC-BH

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products.

Current consumption 0 in standby mode
The compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8A
BIP output transistor adoption (Upper and lower total Vo(sat)=0.5V(typical) at Io=400mA)

Specificaties
Kenmerk Waarde
Kit Name Stepper Motor Driver IC Evaluation Board
Kit Classification Evaluation Board
For Use With Low Saturation Voltage Stepper Motor Drive
Motor Type Stepper
Featured Device LB1909MC-BH
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03-07-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
57,40
(excl. BTW)
69,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 57,40
Related Products
The first Romeo Arduino Control Board with Motor ...
Description:
The first Romeo Arduino Control Board with Motor Drivers is based on the Arduino Uno with a socket to add bluetooth APC220 Radio Communication Module. Also the controller board has integrated input/output sensor pinout for connecting gravity compatible sensors and ...
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control ...
The STEVAL-IPMNG3Q is a compact 3-phase ac motor ...
Description:
The STEVAL-IPMNG3Q is a compact 3-phase ac motor driver board based on a SLLIMM™-nano (Small Low-Loss Intelligent Moulded Module) 2nd series device. It is designed for driving high-power motors in a wide range of applications such as white goods, air-conditioning, ...
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC ...
Description:
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC motor driver expansion board based on the STSPIN240 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery ...