ON Semiconductor BLDC-GEVK Internet of Things (IOT) BLDC Motor Driver Shield Evaluation Kit BLDC Evaluation Kit

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

ON Semiconductor Evaluation Board

The ON Semiconductor evaluation board is an internet of things motor driver shield evaluation board. It comes with LV8907, high performance, sensor-less three-phase BLDC motor controller with integrated gate drivers for driving external N-MOSFETs. An on-chip two-stage charge pump provides the required gate current for a wide range of ultra-low RDS(ON) type external N-MOSFETs. This is applicable for three-phase BLDC motor driver.

Features and Benefits:

• A watchdog timer
• An in-built linear regulator for powering an external circuit
• An SPI interface is provided for parameter setting and monitoring the system health and utilized through the PCA9655E's 16 bits of general purpose parallel input and output (GPIO) expansion
• Local interconnect network (LIN) transceiver
• Supports open-loop, as well as, closed-loop speed control with user configurable start up, speed setting and proportional/integral (PI) control coefficients
• System protection and diagnostic functions such as over-current, over-voltage, short-circuit, under-voltage and over-temperature

Specificaties
Kenmerk Waarde
Kit Name Internet of Things (IOT) BLDC Motor Driver Shield Evaluation Kit
Kit Classification Evaluation Kit
For Use With Three-Phase BLDC Motor Driver
Motor Type BLDC
Featured Device LV8907UWR2G, MBRB40250TG, MM3Z39VT1G, MMDL6050T1G, NTMFS5C404NLTT3G, PCA9655EMTTXG
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
37,03
(excl. BTW)
44,81
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 37,03
Related Products
The EHS6T-USB Terminal Starter Kits are available in ...
Description:
The EHS6T-USB Terminal Starter Kits are available in two varieties;-EHS6T-USB PACK A: Contains a stubby antenna (847-6925)-EHS6T-USB PACK B: Contains a mag mount antenna (847-6929)The Cinterion® EHS6T-USB 3G M2M plug and play terminal is ideal for any designer that is ...
The YROTATE-IT-RX23T board with its RX23T microcontroller is ...
Description:
The YROTATE-IT-RX23T board with its RX23T microcontroller is capable of driving 3-phase permanent magnet AC motors up to 48Vdc with a peak current of 5A. It features an intuitive PC GUI to manage the motor speed, display the vector control ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in ...
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC ...
Description:
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC motor driver expansion board based on the STSPIN240 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery ...