Infineon TLE9201SGAUMA1, BLDC Motor Driver IC, 28 V 6A 12-Pin, DSO-12-17

  • RS-stocknr. 166-1194
  • Fabrikantnummer TLE9201SGAUMA1
  • Fabrikant Infineon
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

Full-bridge Motor Driver ICs, Infineon

Full- or H-bridge controller/driver ICs from Infineon. These devices are designed for use with DC motors or other inductive loads in automotive applications but may be used to drive a variety of other loads. Some of the ICs include an SPI control/status interface which is TTL/CMOS-compatible.

Short-circuit and over-temperature protection
Low standby current
Under-voltage shutdown

Motor Controllers & Drivers, Infineon

Specificaties
Kenmerk Waarde
Motor Type BLDC
Output Configuration Full Bridge
Maximum IGBT Collector Current 6A
Maximum Collector Emitter Voltage 28 V
Mounting Type Surface Mount
Package Type DSO-12-17
Maximum Operating Supply Voltage 28 V
Pin Count 12
Typical Switching Frequency 20kHz
Minimum Operating Temperature -40 °C
Dimensions 7.5 x 6.4 x 2.35mm
Width 6.4mm
Maximum Operating Temperature +150 °C
Height 2.35mm
Length 7.5mm
1000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Reel of 1000)
1,725
(excl. BTW)
2,087
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
1000 +
€ 1,725
€ 1.725,00
*prijsindicatie
Related Products
Integrated Ideal Diode controllers offer significant advantages over ...
Description:
Integrated Ideal Diode controllers offer significant advantages over the use of discrete diodes in applications where forward voltage losses must be minimized such as diode-ORing of low voltage DC supplies. Some of these devices from Linear Technology include on-chip MOSFETs ...
Input to output isolation voltageOperating voltage with wide ...
Description:
Input to output isolation voltageOperating voltage with wide inputSeparate source and sink outputsApplications in AC Motor and Brushless DC Motor Drives.
Silicon Labs Si826x range of ISOdrivers are pin-compatible ...
Description:
Silicon Labs Si826x range of ISOdrivers are pin-compatible drop-in upgrades for popular gate drive optocouplers. These devices are ideal for driving power MOSFETs and IGBTs used in a wide variety of inverter and motor control applications. The Si826x isolated gate ...
The IFX9201SG a general purpose 6A H-bridge for ...
Description:
The IFX9201SG a general purpose 6A H-bridge for industrial applications, home appliance and building automation, power tools battery management and medical applications, designed for the control of small DC motors and inductive loads is available from Infineon now. The outputs ...