- RS-stocknr.:
- 189-0512
- Fabrikantnummer:
- NCV7750DPR2G
- Fabrikant:
- onsemi
Dit product is momenteel niet beschikbaar voor nabestelling.
We hebben dit product helaas niet op voorraad en het is op dit moment niet beschikbaar voor nabestelling.
Prijs Elk (in een pakket van 5)
€ 2,528
(excl. BTW)
€ 3,059
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
5 - 5 | € 2,528 | € 12,64 |
10 - 95 | € 2,136 | € 10,68 |
100 - 245 | € 1,686 | € 8,43 |
250 - 495 | € 1,506 | € 7,53 |
500 + | € 1,41 | € 7,05 |
*prijsindicatie |
- RS-stocknr.:
- 189-0512
- Fabrikantnummer:
- NCV7750DPR2G
- Fabrikant:
- onsemi
Datasheets
Wetgeving en compliance
Productomschrijving
Power Up without Open Circuit Detection
Low Quiescent Current
16 bit SPI control
Limp Home Functionality
3.3V and 5V compatible Digital Input Supply Range
Fault Reporting of Open Load, Over Load, and Over Temperature
Power On Reset
Uniform output structure of all outputs on one side of the package.
4 Channels
600 mA Low-Side Drivers
Parallel Input Pins
Allows for power up without LED load illumination.
Able to report errors and is capable of daisy chain connections.
Automotive system feature allowing the vehicle to maintain operation with a defective micro processor.
Suitable for both 3.3V and 5V micro processor interfaces.
The micro processor and report unusual activity for troubleshooting and system integrity purposes.
Maintains a smooth system power up and power down.
Simplifies printed circuit board layouts.
Automotive requirement maintains site and change control.
Applications
Relay Driver
LED Driver.
Stepper Motor Driver
End Products
Automotive Body Control Unit
Automotive Engine Control Unit
Low Quiescent Current
16 bit SPI control
Limp Home Functionality
3.3V and 5V compatible Digital Input Supply Range
Fault Reporting of Open Load, Over Load, and Over Temperature
Power On Reset
Uniform output structure of all outputs on one side of the package.
4 Channels
600 mA Low-Side Drivers
Parallel Input Pins
Allows for power up without LED load illumination.
Able to report errors and is capable of daisy chain connections.
Automotive system feature allowing the vehicle to maintain operation with a defective micro processor.
Suitable for both 3.3V and 5V micro processor interfaces.
The micro processor and report unusual activity for troubleshooting and system integrity purposes.
Maintains a smooth system power up and power down.
Simplifies printed circuit board layouts.
Automotive requirement maintains site and change control.
Applications
Relay Driver
LED Driver.
Stepper Motor Driver
End Products
Automotive Body Control Unit
Automotive Engine Control Unit
Specificaties
Kenmerk | Waarde |
---|---|
Motor Type | Stepper |
Maximum Output Current | 1.3A |
Maximum Supply Voltage | 5.5 V |
Mounting Type | Surface Mount |
Package Type | SSOP |
Pin Count | 24 |
Maximum Operating Supply Voltage | 5.5 V |
Minimum Operating Supply Voltage | -0.3 V |
Typical Switching Frequency | 5 (Maximum)MHz |
Width | 3.9mm |
Dimensions | 8.65 x 3.9 x 1.5mm |
Product Width | 3.9mm |
Maximum Operating Temperature | +150 °C |
Automotive Standard | AEC-Q100 |
Length | 8.65mm |
Minimum Operating Temperature | -40 °C |
Product Height | 1.5mm |
Height | 1.5mm |
Product Length | 8.65mm |