Infineon BTN7930BAUMA1, BLDC Motor Driver IC, 18 V 20A 7-Pin, TO-263

  • RS-stocknr. 753-2850
  • Fabrikantnummer BTN7930BAUMA1
  • Fabrikant Infineon
Wetgeving en compliance

Motor Driver ICs, Infineon

Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineon’s single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.

Trilith ICs include overcurrent and over-temperature protection for the high-side switches
All Servo Drivers offer over temperature and over current protection as well as over and under voltage lockout except the TLE4205G (462-7823)

Motor Controllers & Drivers, Infineon

Kenmerk Waarde
Motor Type BLDC
Output Configuration Half Bridge
Maximum IGBT Collector Current 20A
Maximum Collector Emitter Voltage 18 V
Mounting Type Surface Mount
Package Type TO-263
Pin Count 7
Maximum Operating Supply Voltage 28 V
Minimum Operating Supply Voltage 5.5 V
Typical Switching Frequency 25kHz
Maximum Operating Temperature +150 °C
Height 4.4mm
Width 9.25mm
Minimum Operating Temperature -40 °C
Dimensions 10 x 9.25 x 4.4mm
Length 10mm
316 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 5,43
10 - 49
€ 4,80
50 - 249
€ 4,17
250 - 499
€ 3,55
500 +
€ 2,92
Related Products
The L298 from ST is an integrated high ...
The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that ...
The Control Integrated Power System (CIPOS) are families ...
The Control Integrated Power System (CIPOS) are families of highly integrated, compact power modules. They are designed to drive motors in home appliances, fan and pump applications. These energy-efficient Intelligent Power Modules (IPM) deliver increased power density with enhanced system ...
BD63715AEFV is a bipolar low-consumption driver that driven ...
BD63715AEFV is a bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36 V, and rated output current is 1.5 A. CLK-IN driving mode is adopted for input interface, and excitation mode is ...
ROHM offers a wide lineup of H-bridge drivers ...
ROHM offers a wide lineup of H-bridge drivers in different supply voltages (7V/18V/36V) and output currents (0.5A/1A/2A) to meet the needs of a variety of applications. Our standard products also contain a VREF variable function that contributes to lower power ...