Unipower 5 → 60 A Motor Load Transducer, 24 V dc, -15 → +50 °C

  • RS-stocknr. 793-4102
  • Fabrikantnummer APM10
  • Fabrikant Unipower
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DK
Productomschrijving

APM10 - kW-Transmitter

The APM10 is a monitor- and protection unit for motors. The unit converts kW into an analogue process signal for use in PLC's and other controllers.

Transmitter for kW, 3 phase symmetrical load
For connecting to a 3 phase net of up to 3x500 Vac
Internal Current Transformer
Input Current Range 5, 10, 20, 25, 40, 60 Aac
24 V Power Supply
Analogue output 0(4)-20mA or 0(2)-10V
DIP switch settings for output signal
Galvanic insulation between input and output
Test Voltage 3 kV

Unipower Motor Protection

Specificaties
Kenmerk Waarde
Motor Protection System HC
Motor Protection Component Load Transducer
Number of Inputs 4
Output 1
Sensing Type Thermistor
Supply Voltage 24 V dc
Current Rating 5 → 60 A
Overall Length 86mm
Overall Width 36mm
Overall Depth 58mm
Minimum Operating Temperature -15°C
Maximum Operating Temperature +50°C
Enclosure Type Lexan UL94V-0 (Upper), Noryl UL94V-0 (Lower)
Series APM
Size D 58 x W 36 x H 86mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
250,43
(excl. BTW)
303,02
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 250,43
Related Products
Quantifying the status of a three-phase induction motor ...
Description:
Quantifying the status of a three-phase induction motor and pump. The alarm output threshold default is set. You can customize the value according to the site. As for comprehensive current diagnosis, the degradation can be detected comprehensively by combining each ...
The load power monitor achieves effective protection for ...
Description:
The load power monitor achieves effective protection for three-phase motors in critical applications, guarding against nuisance trips because of voltage fluctuations.,Reliable detection of overload or underload operating conditions is achieved by measurement of this true power. Independent settings for power ...
The PAIR module is designed for use with ...
Description:
The PAIR module is designed for use with induction motors that require protection against both overload and underload conditions. Overcurrent sensing with inverse time delay responseSensitive underload protection by power factor measurementIntegral current transformer up to 32ACurrent range can be ...
SIMOCODE (SIRIUS Motor Management and Control Devices) Pro ...
Description:
SIMOCODE (SIRIUS Motor Management and Control Devices) Pro C is a practicable and economical motor management system.SIMOCODE pro is a flexible, modular motor management system it optimizes the connection between I&C and motor system, increases plant availability and allows significant ...