- RS-stocknr.:
- 161-2712
- Fabrikantnummer:
- 32961
- Fabrikant:
- CRC
- RS-stocknr.:
- 161-2712
- Fabrikantnummer:
- 32961
- Fabrikant:
- CRC
Wetgeving en compliance
- Land van herkomst:
- BE
Productomschrijving
Polymer Remover
Highly effective and powerful solvent blend developed for use on heavily soiled moulds and dies to remove a variety of moulding deposits.
Features
Foaming action which clings to the mould surface and facilitates a good contact with the contamination.
Removes: plastics, rubbers and resin residues, even when carbonized.
Thixotropic formulation for maximum efficiency, even on vertical surfaces.
Leaves a clean and dry surface after application.
Removes: plastics, rubbers and resin residues, even when carbonized.
Thixotropic formulation for maximum efficiency, even on vertical surfaces.
Leaves a clean and dry surface after application.
Application
Thorough cleaning of mould surfaces.
Eliminate remnants of polymers gaskets or gaz blowouts on transforming moulds.
Eliminate remnants of polymers gaskets or gaz blowouts on transforming moulds.
Directions
Apply think layer from 25 cm distance.
Allow to act on the surface for 10 to 15 minutes.
Take of the residue with a brush, plastic spatula or a water jet.
Clean the mould according to the standard procedure.
Protect the surfaces against corrosion when stored.
Allow to act on the surface for 10 to 15 minutes.
Take of the residue with a brush, plastic spatula or a water jet.
Clean the mould according to the standard procedure.
Protect the surfaces against corrosion when stored.
Specificaties
Kenmerk | Waarde |
---|---|
Package Size | 400 ml |
Base Material | Alcohol |
Compatible Materials | Plastic, Rubber |
Maximum Operating Temperature | 50°C |
Trade Name | Polymer Remover |