Druck IO620-PRV-P-3-4685 Multi Function Calibrator Pressure Relief Valve, For Use With PV 621 Series, PV 622 Series

  • RS-stocknr. 541-132
  • Fabrikantnummer IO620-PRV-P-3-4685
  • Warranty 1 jaar
  • Fabrikant Druck
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Druck Pressure Relief Valve

Introducing Druck's pressure relief valve, forming part of and for use with the PV 621 series. The valves main purpose is to protect the pressure module and device under test from overpressure. This pressure relief valve has been designed to be fitted to the PV 62X system for it to function properly and offer the protection and safety it was designed for.

Specificaties
Kenmerk Waarde
Accessory Type Pressure Relief Valve
For Use With PV 621 Series, PV 622 Series
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10-09-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
211,00
(excl. BTW)
255,31
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 211,00
Related Products
CETOP 05 relief valves for protection against excess ...
Description:
CETOP 05 relief valves for protection against excess pressure for expensive pumps and hydraulic circuit components. Parker ZDV series valves are capable of handling flow rates of up to 140 L/min and a maximum pressure of 315 bar (part number ...
Simple, low cost unitsSuitable for direct connection to ...
Description:
Simple, low cost unitsSuitable for direct connection to pressure vessels and associated componentsPop-type operationRelief setting accuracy +/-20%Brass adjusting cap.
Protects air-operated equipment from over pressureTemperature range -34°C ...
Description:
Protects air-operated equipment from over pressureTemperature range -34°C to +65°C/80°C (72//74)Push-to-lock adjusting knob, optional tamper proof coverQuick clamp required.
Protects compressed air systems from over pressurisationLow torque ...
Description:
Protects compressed air systems from over pressurisationLow torque push-to-lock adjustment knobCompact designPanel mount dimensions (30mm dia. hole 6mm panel thickness maximum) or bracket mountingRelief pressure adjustment range 0.3 to 9 barZinc alloy body.