Martindale TEK 300 Multi Function Calibrator 20mA UKAS Calibration

  • RS-stocknr. 207-9266
  • Fabrikantnummer TEK300
  • Fabrikant Martindale
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Martindale Direct Current Calibrator

The Martindale direct current calibrator is able to sink or source a current up to 20mA. It is intended for process control instrumentation and general purpose signal
injection applications. It has a monitor mode facility incorporated into the design, whereby the current (0mA to 20mA) in the process loop can be monitored and read directly from the digital display. This device is also fully protected against inadvertent misuse. This low-cost unit offers exceptional value for money means of delivering and measuring current ranging between 0mA and 20mA currents. This makes it ideal for cost-effective application in testing, calibrating and troubleshooting in a wide range of process control environments.

Features and Benefits

Sink, source and monitor modes ranging between 0mA and 20mA F. S. (+0.1%)
DC/DC converter output of 28.5V (+0.1V)
Resolution of 10μA
Overload protection for additional safety
ABS case with clear three digit LCD display
Temperature drift 150ppm°C
Linearity of 0.15%
Output noise (typically) of 4mV p/p
Battery condition and error indication LEDs
Requires two PP3 alkaline batteries
Capable of withstanding DC voltages up to 50V but can be damaged by AC input
Operating temperature ranges between 0°C and 50°C

Applications

Process control automation
Manufacturing
Instrumentation

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Maximum Current Measurement 20mA
Calibrated UKAS
Port Connections 4 mm Terminal
Battery Type PP3 9 V
Power Source Battery
Dimensions 180 x 100 x 144mm
Weight 380g
Height 44mm
Length 180mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Model Number p TEK 300
Width 100mm
11 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
463,00
(excl. BTW)
560,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 463,00
Related Products
Small but mighty, Druck's UPS III loop calibrator ...
Description:
Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers ...
The Gossen Metrawatt METRAHIT multifunction calibrator has a ...
Description:
The Gossen Metrawatt METRAHIT multifunction calibrator has a highly accurate calibration and simulation instrument for electrical quantities. As a handheld instrument, it is suitable for precise, onsite calibration and inspection tasks, as well as for test department and laboratory work. ...
DPI 620 GENII IS is Druck's next-generation instrument ...
Description:
DPI 620 GENII IS is Druck's next-generation instrument for calibration, configuration and maintenance of electrical, frequency, pressure and temperature devices in measurement and control applications. It can measure and source a wide range of parameters simultaneously including mA, mV, V, ...
The DPI 880 multifunction calibrator forms part of ...
Description:
The DPI 880 multifunction calibrator forms part of the DPI 800 series of calibrators. This series has been designed to offer a complete range of advanced, robust and simple to use handheld instruments. Druck's multifunctional calibrator is the ideal solution ...