Fluke 725 Multi Function Calibrator 30V 24A UKAS Calibration

  • RS-stocknr. 375-6009
  • Fabrikantnummer FLUKE 725US
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving

Multifunction Process Calibrator 725

Take along the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Do you need to calibrate transmitters? The 725's split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.
From the moment you pick it up, the Fluke 725 is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.

Features and Benefits

•Small, streamlined shape makes it easy to carry •Rugged, reliable design stands up to field use
•Easy to read measure/source screen lets you view input and output simultaneously
•Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
•Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
•Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
•Source mA with simultaneous pressure measurement to conduct valve and I/P tests
•Support flow meter testing with frequency and CPM functions
•Perform fast linearity tests with auto- step and auto-ramp features
•Power transmitters during test using loop supply with simultaneous mA measurement
•Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms
•Store frequently used test setups for later use
•Backlight lets you work in poor light
•Large battery capacity of four AA cells
•Battery door for easy changes

Supplied with

batteries, test leads/clips.

Fluke Multi Function Calibrator

The Fluke multifunction calibrator is used to test and calibrate almost any process parameter. It can be used to measure and source current ranging from 0mA to 24mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules to test and calibrate almost any process parameter. Its split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. This calibrator has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests. It is supplied with batteries and test leads/clips.

Features and Benefits


Small, streamlined shape makes it easy to carry
• Rugged, reliable design stands up to field use
• Measure and source thermocouple type J,K,T,E,R,S,B,L,U,N,XK,BP
• Measure and source RTDs NI-120,PT100,PT500,PT1000
• Easy to read measure/source screen lets you view input and output simultaneously
• Measure/source pressure using any of 29 Fluke 700Pxx pressure modules
• Easy to operate and user-friendly menu control
• Source mA with simultaneous pressure measurement to conduct valve and I/P tests
• Support flow meter testing with frequency and CPM functions
• Perform fast linearity tests with auto-step and auto-ramp features
• Power transmitters during test using loop supply with simultaneous mA measurement
• Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10ms
• Store frequently used test setups for later use
• Operating temperature ranges between –10°C and 55°C
• Backlight lets you work in poor light
• Large battery capacity of four AA cells
• Battery door for easy changes

Applications


Process control automation
• Manufacturing
• Instrumentation

Certifications


CE certified
• CSA certified

Specificaties
Kenmerk Waarde
Maximum Voltage Measurement 30V
Maximum Current Measurement 24A
Calibrated UKAS
Port Connections Pressure Module
Battery Life 25 h
Battery Type AA
Power Source Battery
Dimensions 47 x 96 x 200mm
Weight 650g
Height 200mm
Length 47mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Model Number p 725
Width 96mm
4 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
3.480,00
(excl. BTW)
4.210,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 3.480,00
Related Products
The Fluke 709 Precision Loop Calibrator reduces the ...
Description:
The Fluke 709 Precision Loop Calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Primary ...
DPI 620 GENII IS is Druck's next-generation instrument ...
Description:
DPI 620 GENII IS is Druck's next-generation instrument for calibration, configuration and maintenance of electrical, frequency, pressure and temperature devices in measurement and control applications. It can measure and source a wide range of parameters simultaneously including mA, mV, V, ...
Smart Control Valve Testing is now easier than ...
Description:
Smart Control Valve Testing is now easier than ever:The Fluke 710 Valve Testing Loop Calibrator is designed to enable users to perform quick, easy tests on HART smart control valves. Featuring built-in test procedures and an intuitive user interface, the ...
The DPI 880 multifunction calibrator forms part of ...
Description:
The DPI 880 multifunction calibrator forms part of the DPI 800 series of calibrators. This series has been designed to offer a complete range of advanced, robust and simple to use handheld instruments. Druck's multifunctional calibrator is the ideal solution ...