Fluke I30 Multimeter Current Clamp Adapter, 30A dc, 30A ac, 19mm With RS Calibration

  • RS-stocknr. 654-1377
  • Fabrikantnummer FLUKE I30
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

i30 30A High Resolution, High Bandwidth Current Probe

The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.

Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
1.5m flying lead terminated with 4mm shrouded plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A

Supplied with

Alkaline PP3 battery and operators manual.

Warning

  • Use of the probe on uninsulated conductors is limited to 300V ac rms or dc and frequencies below 1 kHz.
Specificaties
Kenmerk Waarde
Adapter Type AC/DC
Maximum DC Current 30A
Maximum AC Current 30A ac
Best Accuracy ±1% + 2 mA
Resolution 1 mA
Maximum Conductor Size 19mm
Calibrated RSCAL
Safety Category CAT III 300 V
Output Type Current
Connector Type 4 mm Plug
Battery Type 9V
Battery Life 30 h
Cable Length Extended 1.5m
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Model Number p I30
Safety Category Level CAT III
Safety Category Voltage 300V
12 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
523,00
(excl. BTW)
632,83
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 523,00