RS PRO Multimeter Fuse, 500mA 1000V, For Use With RS PRO GS38 Fused Test Leads

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Replacement Fuses for Fused Test Leads and Accessories

Introducing the RS PRO multimeter fuses for replacement of fuses in the RS PRO GS38 Fused Test Leads and fused accessories. This fuse features a high breaking capacity rated at 500 mA with 50 kA rupture current and has been designed specifically for the protection of multimeters, with versatile suitability for a variety of other applications too. This RS PRO fuse is an ideal replacement part for a wide variety of multimeters.

Features and Benefits:

• High Breaking Capacity rated at 500 mA with 50 kA rupture current
• Compatible with a wide variety of multimeters
• Pack of three fuses
• Safety Category Level IV

Applications:

These fuses are used to replace the old fuses in multimeter testers. Multimeter fuses are a critical component for the safe and efficient running of all types of multimeters. They protect multimeters in the event of current overload. The choice of multimeter fuse will depend on the make, model and type of multimeter you're using. Various amperages and voltages are available, and multimeter fuses can be bought individually or in multipacks.

Approvals and Certification:

Meets Safety Category level IV

What kind of fuse should I use for a multimeter?

The type of replacement fuse you need will depend on the make, model and type of multimeter that is being used. It is important to select the correct fuse in line with the manufacturers' guidelines to ensure that the fuse has the correct amperage and voltage for the multimeter.

What products will this fuse work with?

This RS PRO fuse will work with the following products, and more:
204-583 – RS PRO Fused Probe Kit
204-599 – RS PRO Fused Probe Kit
125-3731 – RS PRO Test Leads Kit
125-3732 - RS PRO Fused Probe Kit
125-3734 – RS PRO Fused Probe Kit
212-966 - RS PRO Test Leads Kit
731-5273 - RS PRO Test Leads Kit
181-7406 - RS PRO Test Leads Kit

Specificaties
Kenmerk Waarde
Accessory Type Fuse
For Use With RS PRO GS38 Fused Test Leads
Current 500mA
Voltage 1000V
Breaking Capacity 50kA
Dimensions 6.3 x 32mm
Diameter 6.3mm
Length 32mm
75 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
249 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 3)
2,497
(excl. BTW)
3,021
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
3 +
€ 2,497
€ 7,491
*prijsindicatie
Related Products
The MX1 and MX2B are genuinely double-insulated up ...
Description:
The MX1 and MX2B are genuinely double-insulated up to 1500 V in line with safety standards (case insulation voltage above 8 kV). SECUR'X locking prevents the test leads from being disconnected accidentally. If the leads remain connected, it is impossible ...
Fused test lead set for use with the ...
Description:
Fused test lead set for use with the Fluke 1650 & 1650B series electrical installation testers,Set contains (1 off red, 1 off blue & 1 off green ):. 1.2m test leads with right angle shrouded plug, integral test prod with ...
A range of accessories with 4 mm shrouded ...
Description:
A range of accessories with 4 mm shrouded socket connections intended for use with the multimeter test lead set, CAT III, CAT IV, 600 V, 1000 V. All accessories meet the requirements of EN61010 to their rated voltage. Thin fine ...
A range of accessories with 4 mm shrouded ...
Description:
A range of accessories with 4 mm shrouded socket connections intended for use with the multimeter test lead set 340-2538. All accessories meet the requirements of EN61010 to their rated voltage. RS Sprung Hook Grabbers 1000 V CAT III, 340-2544RS ...