RS PRO Test Lead Kit, Fused, CAT III 600 V

Wetgeving en compliance
Land van herkomst: GB

RS PRO Multimeter Lead Set in Pouch

RS PRO practical lead sets supplied in a durable grey pouch with attractive yellow piping. The standard set (731-5277) has a wide range of accessories for taking measurements in most situations. The fused set (731-5273) has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard.

RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.

Contents Standard Set

2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right-angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black).
Extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA.

Also available:
Thin fine insulated prods set 262-7770 for use with fused test prods and multimeter test lead sets
Shuttered lantern probe set 262-7786 for use with fused test prods and multimeter test lead sets.

Typical applications
Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.
Test and Measurement

Safety Precautions
Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.


EC 1010 Cat III 600V; GS38


  • Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance.
Kenmerk Waarde
Lead Type Test Lead Kit
Connector Type Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug
Fused Yes
Lead Length 1.2m
Safety Category Voltage 600V
Safety Category CAT III 600 V
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Safety Category Level CAT III
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
145 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 53,79
Related Products
Fluke 179 True RMS digital multimeter kit is ...
Fluke 179 True RMS digital multimeter kit is the preferred choice for electrical engineers, industrial and commercial electricians. Fluke 179 multimeter offers a digital display with analogue bar graph, backlight and built in temperature measurements. Contains features to help you ...
The Fluke 289 is optimised for industrial and ...
The Fluke 289 is optimised for industrial and field service professionals involved in the electrical installation and maintenance of facilities or critical systems. It is the next generation of high performance industrial logging digital multimeters. Compatible with Fluke Connect, which ...
The RS Pro IDM20 is a great value pocket digital multimeter with double-moulded plastic housing and a large, high contrast 4000 Counts LCD display. Features include non-contact detection and flashlight. Pocket size digital multimeter 3 digit, 4000 Count LCD display ...
Designed as a compact, rugged and high performing ...
Designed as a compact, rugged and high performing digital multimeter. This handheld device can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has a large LCD display where the measurement readouts can be viewed ...