Fluke FTP-1 Fused Test Probe, Fused, CAT III 1000 V, CAT IV 600 V

  • RS-stocknr. 880-1407
  • Fabrikantnummer FTP-1
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Fluke FTP-1 Fused Test Probe Set

Brought to you by Fluke, these SureGrip fused test probes have built-in replaceable fuses for additional measurement protection. Rated to CAT III 1000V, each probe has removable tip guards for reduced probe tip exposure. All models are highly reliable and excellent quality.

Features and Benefits

• Built-in fuses for additional measurement protection
• Fluke fuse 1000 V, 11 A with 20 kA interrupt rating
• 2mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads
• CAT III 1000 V, CAT IV 600 V, 10 A rating
• Operating temperature -20°C to 50°C (-5°F to 120°F)

What are test probes?

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

What are the differences between safety categories?

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.

Specificaties
Kenmerk Waarde
Lead Type Fused Test Probe
Connector Type Lantern Spring Contact, Threaded Probe Tip
Fused Yes
Current Rating 10A
Safety Category Voltage 600 V, 1000 V
Safety Category CAT III 1000 V, CAT IV 600 V
Minimum Operating Temperature -20°C
Maximum Operating Temperature +50°C
Safety Category Level CAT III, CAT IV
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
102,00
(excl. BTW)
123,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 102,00
Related Products
The MX1 and MX2B are genuinely double-insulated up ...
Description:
The MX1 and MX2B are genuinely double-insulated up to 1500 V in line with safety standards (case insulation voltage above 8 kV). SECUR'X locking prevents the test leads from being disconnected accidentally. If the leads remain connected, it is impossible ...
Probe tweezers to measure low value surface mount ...
Description:
Probe tweezers to measure low value surface mount resistors4-wire measurement method to eliminate the resistance of the test leadsMaximum voltage between test lead and ground: 33Vrms, 46.7Vpeak or 70VdcMaximum Current: 1A.Compatible with the Fluke 8808A, 8845A and 8846A precision digital ...
Universal temperature adaptor utilizing a P-N semiconductor junction ...
Description:
Universal temperature adaptor utilizing a P-N semiconductor junction as the sensing element. The adaptor can be plugged into any standard multimeter with input impedence of 1MΩ or greater to provide direct temperature measurement up to 150°C. Powered by PP3 battery ...
An indispensable accessory for analogue or digital oscilloscopes ...
Description:
An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different requirements.1 or 2 input channels.Coaxial or banana measuring leads/long length banana leads.A model with coaxial ...