Microchip Multiprotocol Transceiver 24-Pin QFN, SEC1210-I/PV-URT

  • RS-stocknr. 144-5734
  • Fabrikantnummer SEC1210-I/PV-URT
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TH
Productomschrijving

SEC1110/1210 Smart Card to USB/SPI/UART Bridges

The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to the latest USB and EMV standards to ensure interoperability with the latest and legacy Smart Card systems alike.

To simplify the development of custom USB-based applications these devices integrate USB Chip Card Interface Device (CCID) firmware. Also on-board is One-Time Programmable memory which can be utilised to host custom firmware or device data.

Features

Fully compliant with Smart Card standards: ISO/IEC 7816, EMV 4.2/4.3, ETSI TS 102 221 and PC/SC
USB, SPI or UART host interface
Dedicated hardware for performance
Low standby and dynamic power
OTP memory for code and custom configuration data
Versatile ETU rate generation, supporting current and proposed rates (to 826 Kbps and beyond)

USB (Universal Serial Bus) - Microchip

Specificaties
Kenmerk Waarde
Data Rate 12Mbps
Mounting Type Surface Mount
Package Type QFN
Pin Count 24
Transmitter Signal Type Single Ended
Receiver Signal Type Differential
Interface Standards EMV 4.2/4.3, ETSI TS 102 221, ISO/IEC 7816, PC/SC
Power Supply Type Single
Typical Single Supply Voltage 3.6 → 5.5 V
Length 5.1mm
Maximum Operating Temperature +85 °C
Dimensions 5.1 x 5.1 x 0.95mm
Minimum Operating Temperature -40 °C
Height 0.95mm
Width 5.1mm
490 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tray of 490)
2,02
(excl. BTW)
2,44
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
490 +
€ 2,02
€ 989,80
*prijsindicatie
Related Products
Composite integrated solutions incorporating EMI filtering, ESD protection ...
Description:
Composite integrated solutions incorporating EMI filtering, ESD protection and Line Termination in a single SMT device. Provides USB Line Termination, Filtering and ESD ProtectionSingle IC Offers Cost Savings by Replacing 3 Resistors, 2 Capacitors, and 5 TVs diodesBi-directional EMI Filtering ...
Description:
The MEC1428 is the latest member of the MEC14XX family and adds a new level of design functionality for computing engineers by adding Slave Attached Flash (SAF), which is an optimal solution for USB Type-C™ power delivery. The MEC1428 device ...
The Microchip USB251xB/USB251xBi family of devices are USB ...
Description:
The Microchip USB251xB/USB251xBi family of devices are USB 2.0 Hub Controllers. These devices feature MultiTRAK™ technology that incorporates a dedicated Transaction Translator (TT) per port to maintain consistent Full-Speed data throughput regardless of the number of active downstream ...
The Microchip USB251xB/USB251xBi family of devices are USB ...
Description:
The Microchip USB251xB/USB251xBi family of devices are USB 2.0 Hub Controllers. These devices feature MultiTRAK™ technology that incorporates a dedicated Transaction Translator (TT) per port to maintain consistent Full-Speed data throughput regardless of the number of active downstream ...