Lantronix XP1004000-03R Networking Module, 10 Base-T, 100 Base-TX

  • RS-stocknr. 708-0044
  • Fabrikantnummer XP1004000-03R
  • Fabrikant Lantronix
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

XPort Ethernet Embedded Device Server module

XPort removes the complexity of designing network connectivity into a product by incorporating all of the required hardware and software in an extended RJ45 PCB-mounting socket. It includes all essential networking features, including a 10BaseT/100BaseTX Ethernet connection and an SoC with operating system, embedded web server, e-mail alerts and full TCP/IP protocol stack.

Ethernet 10Base-T or 100Base-TX (Auto-sensing) via RJ45 connector
Protocols: TCP/IP, UDP/IP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, AutoIP, and HTTP
SNMP, Telnet, Serial, Internal Web Server, and Microsoft Windows-based utility for web configuration
Security: 256-bit AES Encryption, password protection
Internal Web Server: Storage Capacity: 384KB for Web Pages
Based on the DSTni-EX Enhanced 16-bit x86 architecture with 512KB Flash memory, 256KB SRAM
Firmware upgradeable via TFTP and Serial Port
Host communication: serial UART with RTS/CTS flow control
Host interface: Serial UART (RS Part No. 783-2734), RS-485 (RS Part No. 708-0044), MODBUS (RS Part No. 797-6689)
Data Rate: 300bps to 921.6kbps
Power supply: +3.3Vdc
Operating temperature range: -40 to +85°C
Package format: Extended RJ45 PCB-mounting socket
Dimensions: 33.9 x 16.25 x 13.5mm
Included Software: MS Windows-based DeviceInstaller, Com Port Redirector

Specificaties
Kenmerk Waarde
Supported Network Interfaces 10 Base-T, 100 Base-TX
Supply Voltage 3.3V
Dimensions 16.25 x 33.9 x 13.5mm
Height 13.5mm
Length 33.9mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature 0°C
Width 16.25mm
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The RCM3600 RabbitCore processor module offers features and ...
Description:
The RCM3600 RabbitCore processor module offers features and performance for general purpose embedded control systems at low cost. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. • 22MHz Rabbit 3000 MPU • ...
The ultra-compact MiniCore RCM67xx is ideal for today’s ...
Description:
The ultra-compact MiniCore RCM67xx is ideal for today’s Smart Energy initiatives as well as other applications that require a cost effective web-enabled device server. The RCM67xx series provides up to 6 serial ports, configurable I/O and control features such as ...
The RCM4300 RabbitCore processor module offers the features ...
Description:
The RCM4300 RabbitCore processor module offers the features and performance to support data encryption, secure data transmission and web server applications. The RCM4300 module provides the capability to use up to 1GB mass storage with the industry-standard miniSD™ memory cards ...
The RCM37xx RabbitCore processor modules offer the features ...
Description:
The RCM37xx RabbitCore processor modules offer the features and performance for embedded control systems, providing secure data communication with integrated Ethernet connectivity. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. The ...