Sensaguard 440N RFID Safety Switch, Plastic, 24 V dc

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Allen Bradley Guardmaster RFID Safety Switch

The Allen Bradley Guardmaster 440N series RFID safety switch has a supply voltage rating of 24VDC and the maximum sensing distance of 10mm. This switch comes with
18 mm stainless steel barrel, 18mm standard actuator, 6in pigtail and 8-pin micro M12 connector. It features the latest generation of RFID technology for coding and inductive technology for sensing. This switch has a large sensing range and tolerance to misalignment. It is a cost-effective solution that is ideally suited for a wide range of industrial safety application.


Note:
Stainless steel is a version suitable for use in harsh environments.
Supplied with actuator

Features and Benefits

Short-circuit and over-voltage protection
Provide tow PNP outputs and one auxiliary PNP
Sensing range of 10%
LED is located on the switch for door status and troubleshooting
Adjustable magnetic latch force 20…60N
Designed for easy mounting on aluminium profile
No dedicated controller is required
Switches can be connected in series with other devices (light curtain, E-stops, key interlock switches)
Extended diagnostics for easy troubleshooting
Multiple sensing directions
Uses the standard proximity bracket

Applications

Sliding
Hinge
Lift-off machine guard doors

Certifications

IP69K rated
IEC60947-5-3
IEC61508
EN954
CE certified
UL listed
TUV certified

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Range Sensaguard
Interface Guardlink
Series 440N
IP Rating IP69K
Actuator Included Yes
Sensor Principle RFID
Actuator Type Coded
Width 18 (Dia.)mm
Length 67.06mm
Housing Colour Red
Safety Category 4
Dimensions 18 (Dia.) x 67.06 mm
6 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
123,00
(excl. BTW)
148,83
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 123,00
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
The Bernstein AG RFID safety switch has a ...
Description:
The Bernstein AG RFID safety switch has a non-contact safety sensor that monitors moveable safety guards, such as doors, flaps and hoods. It belongs to the SRF series of safety switches. It is coded with only one possible code. With ...
The Allen Bradley GuardMaster 440N series magnetic safety ...
Description:
The Allen Bradley GuardMaster 440N series magnetic safety switch has a supply voltage rating of 24VAC/VDC. This switch comes with a housing width of 22.5mm and a control unit 1. It incorporates several magnetically sensitive elements, which must be triggered ...
The Allen Bradley GuardMaster 440N series magnetic safety ...
Description:
The Allen Bradley GuardMaster 440N series magnetic safety switch has a supply voltage rating of 250VAC, 300VDC at 0.5A current. This switch comes with S12 housings and a 3m cable. It incorporates several magnetically sensitive elements, which must be triggered ...