Sensaguard 440N RFID Safety Switch, Plastic, 24 V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

SensaGuard 440N Cylindrical Non-Contact Switch

The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications.

No dedicated controller required for its RFID coding security
Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches)
PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series
Can be connected to standard safety relays, SmartGuards and safety I/O blocks
They provide three different types of PNP output including one auxiliary PNP
Equipped with an LED to indicate the device status and any faults
IP69K environmental rating

Note

Stainless steel version suitable for use in harsh environments.

Standards

IEC60947-5-3, IEC 61508, EN954

Supplied with

Actuator.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Range Sensaguard
Terminal Type Cable
Series 440N
IP Rating IP69K
Actuator Included Yes
Actuator Type Coded
Sensor Principle RFID
Housing Colour Red
Width 18 (Dia.)mm
Dimensions 18 (Dia.) x 67.06 mm
Safety Category 4
Length 67.06mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
111,00
(excl. BTW)
134,31
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 111,00
Related Products
The HYGIECODE MMC-H safety switch has been developed ...
Description:
The HYGIECODE MMC-H safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors.It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene.When used with a ...
The Ferrogard FRS 1, 2, 20 and 21 ...
Description:
The Ferrogard FRS 1, 2, 20 and 21 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from ...
The Ferrogard FRS 6, 9 and 10 are ...
Description:
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the ...
Control category up to 3 to EN954-1Output function ...
Description:
Control category up to 3 to EN954-1Output function indicated at rear of switch by LEDIP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm.