Sensaguard 440N RFID Safety Switch, Plastic, 24 V dc

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

SensaGuard 440N Cylindrical Non-Contact Switch

The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications.

No dedicated controller required for its RFID coding security
Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches)
PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series
Can be connected to standard safety relays, SmartGuards and safety I/O blocks
They provide three different types of PNP output including one auxiliary PNP
Equipped with an LED to indicate the device status and any faults
IP69K environmental rating

Note

Stainless steel version suitable for use in harsh environments.

Standards

IEC60947-5-3, IEC 61508, EN954

Supplied with

Actuator.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Range Sensaguard
Series 440N
IP Rating IP69K
Actuator Included Yes
Sensor Principle RFID
Safety Category 4
Width 18 (Dia.)mm
Length 67.06mm
Dimensions 18 (Dia.) x 67.06 mm
Housing Colour Red
Actuator Type Coded
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
16 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
123,00
(excl. BTW)
148,83
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 123,00
Related Products
The PSEN cs2.2p safety switch is fully coded ...
Description:
The PSEN cs2.2p safety switch is fully coded and the coding is unique which means it will only switch with the supplied actuator. If the actuator/switch is lost or broken, you will need to buy a new set. Series connection ...
Just one safety switch is sufficient for applications ...
Description:
Just one safety switch is sufficient for applications up to Cat 4 of EN954-1 - saving on wiringPossible to provide protection against defeat in accordance with VDE 060 by concealing the installationSimplified installation and adjustmentFor use in EX area Category ...
The D40 from Omron is a compact non-contact ...
Description:
The D40 from Omron is a compact non-contact door switch with easy to see red/yellow LED status indicators. The actuator is smaller than the switch saving space, even when mounted with an L-bracket, the actuator's height will not hinder installation ...
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...