AZM400Z RFID Solenoid Interlock Switches, Die Cast Alloy, 24 V dc

  • RS-stocknr. 146-5803
  • Fabrikantnummer AZM400Z-ST-1P2P-T
  • Fabrikant Schmersal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Bistable, motor-driven system
Clamping force 10.000 N
Release possible against lateral forces up to 300 N
PL e / cat. 4 / SIL 3 for interlocking and guard locking function
Two-channel input signal of the guard locking function
Operation on P/P- and P/N-switching outputs
High tolerance to door misalignment
Universal coding with RFID technology
Connector M12, 8-pole
Guard locking monitored
1 Diagnostic output
Emergency exit

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NO
Housing Material Die Cast Alloy
Connection Type M12
Switch Type Rectangular
Terminal Type 8-Pin M12 Connector
Series AZM400Z
Switching Distance 30 mm
IP Rating IP66, IP67
Supply Current 100 mA
Actuator Included No
Dimensions 166.7 x 77.8 x 65.3 mm
Width 77.8mm
Length 166.7mm
Sensor Principle RFID
Depth 65.3mm
Safety Category Category 4
Standards Met CE, CULus, EAC, TUV
Housing Colour Black, Blue
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
547,93
(excl. BTW)
663,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 547,93
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...
The XCS LE series of solenoid interlock switches ...
Description:
The XCS LE series of solenoid interlock switches from Schneider offer a wide range of different contact versions for a variety of different guard door protection applications. Each XCS LE unit has a robust design with a high enclosure protection ...
The 440G-LZ Guard Locking Switch is designed for ...
Description:
The 440G-LZ Guard Locking Switch is designed for partial body access guard doors. This switch combines microprocessor technology with an RFID coded actuator, and it features a locking bolt drive mechanism that locks only when the correct actuator is detected. ...