AZM400Z RFID Solenoid Interlock Switches, Die Cast Alloy, 24 V dc

  • RS-stocknr. 146-5804
  • Fabrikantnummer AZM400Z-ST-I2-1P2P
  • Fabrikant Schmersal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Bistable, motor-driven system
Clamping force 10.000 N
Release possible against lateral forces up to 300 N
PL e / cat. 4 / SIL 3 for interlocking and guard locking function
Two-channel input signal of the guard locking function
Operation on P/P- and P/N-switching outputs
High tolerance to door misalignment
Repeated individual coding with RFID technology
Coding level "High" according to ISO 14119
Connector M12, 8-pole
Guard locking monitored
1 Diagnostic output
manual release

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NO
Housing Material Die Cast Alloy
Connection Type M12
Switch Type Rectangular
Terminal Type 8-Pole M12 Connector Plug
Series AZM400Z
Switching Distance 30 mm
IP Rating IP66, IP67
Supply Current 100 mA
Actuator Included No
Safety Category Category 4
Width 77.8mm
Length 166.7mm
Standards Met CE, CULus, EAC, TUV
Depth 46.7mm
Dimensions 166.7 x 77.8 x 46.7 mm
Housing Colour Black, Blue
Sensor Principle RFID
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
527,81
(excl. BTW)
638,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 527,81
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
The Ferrogard FRS 1, 2, 20 and 21 ...
Description:
The Ferrogard FRS 1, 2, 20 and 21 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from ...
The Sipha S2 is a non-contact switch in ...
Description:
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. ...
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...