STR1 RFID Safety Switch, Vistal, 24 V dc

  • RS-stocknr. 146-6206
  • Fabrikantnummer STR1-SASU0AC5
  • Fabrikant Sick
Wetgeving en compliance
Land van herkomst: MY

the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with three codes. universally coded sensors accept all actuators. an actuator must be taught into both the uniquely coded and permanently coded variants, this is the only actuator that the Str1 then accepts. the sensor has three active sensor surfaces. the actuator comes in three different sizes. this allows the Str1 to offer maximum mounting flexibility.

response range of up to 14 mm
Small housing with flexible mounting
Sensor activation possible from three
three different actuators available

Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Vistal
Auxiliary Contacts 1
Connection Type 5­Pin M12 Plug
Switch Type Safety
Terminal Type 0.2m cable with 5-Pole M12 Connector
Series STR1
Switching Distance 6 (Side Sensor - On) mm, 10 (Front Sensor - On) mm, 25 (Off) mm
IP Rating IP67
Supply Current 50 mA
Actuator Included Yes
Length 18mm
Built in Safety Relay Yes
Depth 40mm
Number of Approach Directions 5
Standards Met CE, CULus, EN 62061, FCC, IEC 61508
Dimensions 18 x 26.2 x 40 mm
Sensor Principle RFID
Width 26.2mm
Safety Category Category 4 (EN ISO 13849), PL e (EN ISO 13849), SIL3 (IEC 61508), SILCL3 (EN 62061)
Actuator Type Standard
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 134,00