STR1 RFID Safety Switch, Vistal, 24 V dc

  • RS-stocknr. 146-6220
  • Fabrikantnummer STR1-SAMU03P5
  • Fabrikant Sick
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with three codes. universally coded sensors accept all actuators. an actuator must be taught into both the uniquely coded and permanently coded variants, this is the only actuator that the Str1 then accepts. the sensor has three active sensor surfaces. the actuator comes in three different sizes. this allows the Str1 to offer maximum mounting flexibility.

response range of up to 14 mm
Small housing with flexible mounting
options
Sensor activation possible from three
sides
three different actuators available

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Vistal
Auxiliary Contacts 1
Connection Type Cable
Switch Type Safety
Terminal Type Cable
Series STR1
Switching Distance 9 (Side Sensor - On) mm, 14 (Front Sensor - On) mm, 28 (Off) mm
IP Rating IP67
Supply Current 50 mA
Actuator Included Yes
Safety Category Category 4 (EN ISO 13849), PL e (EN ISO 13849), SIL3 (IEC 61508), SILCL3 (EN 62061)
Sensor Principle RFID
Actuator Type Mini
Dimensions 18 x 26.2 x 40 mm
Number of Approach Directions 5
Built in Safety Relay Yes
Length 18mm
Width 26.2mm
Depth 40mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
142,00
(excl. BTW)
171,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 142,00