Preventa XCSRC RFID Safety Switch, Valox, 24 V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Telemecanique Sensors RFID Safety Switch

The Telemecanique sensors XCSRC series RFID safety switch is a 24VDC contactless switch with 2 NO contacts. The RFID safety switch is ideal for applications where there cannot be any contact between the switch and the actuator. Also, it is repairing enabled. It has a single male connector. When used in safety guards, it efficiently provides protection and safety to the machines and operators working on them.

Features and Benefits

• 5-pin M12 one male connector. Single model with 2 new repairing enabled
• High durability
• Industrial degree of protection
• Industry standards compliant
• Multicolour LEDs for indication and signalling
• Operating temperature range between -25°C and 70°C
• Quick response time
• Shock resistant
• Short circuit protection
• Vibration resistant

Applications

• Factory automation
• Food processing industry
• Industrial robots
• Machine guard
• Packaging
• Protective door

Certifications

• CE certified
• CSA certified
• CULus
• DIN EN 61373
• EAC approved
• EN/IEC 60947-5-2-2
• EN/IEC 60947-5-3
• FCC
• IEC 60068-2-27
• IEC 60068-2-6
• IP20 rated
• IP66 rated
• IP67 rated
• IP69K rated
• ISO 14119
• PL = e EN/ISO 13849-1
• RCM
• SIL 3 EN/IEC 61508
• SILCL 3 EN/IEC 62061
• UL listed

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NO
Housing Material Valox
Connection Type M12 Male
Switch Type RFID Safety
Range Preventa
Terminal Type 5 Pin M12 Connector
Series XCSRC
Switching Distance 10 (Operating) mm, 35 (Tripping) mm
IP Rating IP65, IP66, IP67, IP69K
Supply Current 60 mA
Actuator Included Yes
Depth 108.3mm
Dimensions 45 x 15 x 118.6 mm
Number of Approach Directions 3
Length 45mm
Sensor Principle RFID
Safety Category Category 4 EN/ISO 13849-1, PL=e EN/ISO 13849-1, SIL 3 EN/IEC 61508, SILCL 3 EN/IEC 62061
Housing Colour Red
Width 15mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
124,83
(excl. BTW)
151,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 124,83
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
With no need for a separate safety relay ...
Description:
With no need for a separate safety relay this device saves space in the cabinet with no loss of functionality and is easy to install. provides Cat 3//4 or SIL 2//3 protection on moveable machine guards or where frequent washdown ...
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...
the Str1 transponder safety switch has monitored semiconductor ...
Description:
the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with ...