Ferrogard 440N Magnetic Safety Switch, Plastic, 24 V dc

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch

The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Moulded in ABS plastic with a slim rectangular housing to accommodate narrow mounting areas and sealed to IP67 (NEMA 6P), these non-contact switches are ideal for wet environments. They have two active sensing faces allowing more flexible mounting options.

Slim housings to accomodate narrow mounting areas
Two active sensing faces allowing more flexible mounting options
Operating distance for safety contacts: make 12mm; break 23mm
Operating temperature range: -10°C to +65°C
M4 mounting
IP67 rating (NEMA 6P)
Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems

Standards

EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.

Approvals

CE Marked for all applicable directives and cULus.

//media.rs-online.com/t_line/L2963155-30.gif
//media.rs-online.com/t_line/L2963161-30.gif
//media.rs-online.com/t_line/L333574-14.gif
Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts NC
Housing Material Plastic
Connection Type 4-Pin Micro QD
Switch Type Safety
Range Ferrogard
Series 440N
Switching Distance 12 mm, 23 mm
IP Rating IP67
Actuator Included Yes
Sensor Principle Magnetic
Housing Colour Red
Depth 16mm
Dimensions 84 x 19 x 16 mm
Length 84mm
Safety Category 1
Actuator Type Magnetic
Width 19mm
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
150,00
(excl. BTW)
181,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 150,00
Related Products
With no need for a separate safety relay ...
Description:
With no need for a separate safety relay this device saves space in the cabinet with no loss of functionality and is easy to install. provides Cat 3//4 or SIL 2//3 protection on moveable machine guards or where frequent washdown ...
Control category up to 3 to EN954-1Output function ...
Description:
Control category up to 3 to EN954-1Output function indicated at rear of switch by LEDIP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm.
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
Substitutes door handle and safety switch in one ...
Description:
Substitutes door handle and safety switch in one IP67 rated unit, no further door fittings requiredIdeal for small and light movable guards (rotating doors max. 5kg, sliding doors max. 3kg) Tamper-proof due to integral coded safety sensorControl category up to ...