Sipha 440N Magnetic Safety Switch, Plastic, 250 V ac, 300 V dc

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DO
Productomschrijving

Allen-Bradley Sipha S2 Non-contact Safety Switch

The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.

Coding meets the requirements of more complex applications where simple magnetically actuated switching may not be sufficient
Head & actuator are IP67 rated, which is ideal for steam cleaning or high pressure hosing down
Non-contact actuation
Magnetic coded sensing
Slim moulded ABS housing, 82x19x19mm
Must be operated with its own safety control unit

Standards

EN1088, EN292, EN60204-1.

Approvals

UL, CSA.

Supplied with

Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.

//media.rs-online.com/t_line/LE334075-01.gif
Specificaties
Kenmerk Waarde
Supply Voltage 250 V ac, 300 V dc
Safety Contacts NO/NC
Housing Material Plastic
Auxiliary Contacts NC
Range Sipha
Series 440N
IP Rating IP67
Actuator Included Yes
Safety Category 3
Length 82mm
Dimensions 82 x 19 x 19 mm
Depth 19mm
Sensor Principle Magnetic
Actuator Type Magnetic
Width 19mm
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
68,80
(excl. BTW)
83,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 68,80
Related Products
The Ferrogard FRS 13 and 14 are magnetically ...
Description:
The Ferrogard FRS 13 and 14 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch ...
Description:
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the ...
The HYGIEMAG WMR safety switch has been developed ...
Description:
The HYGIEMAG WMR safety switch has been developed for non-contact guard door interlocking of hinged, sliding or removable guard doors. It is ideal for applications that require a wide tolerance to misalignment, a high switching capacity or high levels of ...
The IDEMAG MPR safety switch has been developed ...
Description:
The IDEMAG MPR safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors.It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene.When used with a ...