Preventa XCS-DMC Magnetic Safety Switch, Plastic, 24 V dc

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Telemecanique Sensors Magnetic Safety Switch

The Telemecanique Sensors XCS-DMC series magnetic safety switch has 5mm tolerance to misalignment. This means that it can protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 5mm. The actuator is coded and included in the switch. It is designed for monitoring the doors, covers and guards of industrial machines with an imprecise guiding and low inertia. This safety switch is ideally suited for machines subjected to frequent washing or liquid spray. The switch has 2 normally closed contacts.
Note
With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508. Standards.

Features and Benefits

Actuation on 3 sides, face to face and face to side
Coded reed technology -switch cannot be totally defeated by a simple magnet
Rectangular plastic housing
Operating temperature ranges between -250C and 850C
Maximum mechanical life of 1200000 cycles

Certifications

IP66 rated
IP67 rated
EN1088
EN/IEC60204-1
EN/IEC60947-5-1
EN/ISO12100
ISO14119
UL508
CSAC22.2 No 14
BG certified

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NC
Housing Material Plastic
Auxiliary Contacts None
Switch Type Coded Magnetic Switch
Range Preventa
Terminal Type Cable
Series XCS-DMC
IP Rating IP66, IP67
Actuator Included Yes
Safety Category 4
Sensor Principle Magnetic
Depth 7mm
Length 51mm
Actuator Type Coded
Width 34mm
Dimensions 51 x 16 x 7 mm
Number of Approach Directions 3
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
72 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
57,30
(excl. BTW)
69,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 57,30
Related Products
Bistable, motor-driven systemClamping force 10.000 NRelease possible against ...
Description:
Bistable, motor-driven systemClamping force 10.000 NRelease possible against lateral forces up to 300 NPL e / cat. 4 / SIL 3 for interlocking and guard locking functionTwo-channel input signal of the guard locking functionOperation on P/P- and P/N-switching outputsHigh tolerance ...
The Telemecanique sensors XCSRC series RFID M12 plug ...
Description:
The Telemecanique sensors XCSRC series RFID M12 plug is a loopback device. The plug is compatible with XCSRC.2M12 series safety switches. The XCSRC.2M12 are special daisy chain models of the RFID safety switches by Telemecanique sensors. The RFID safety switch ...
The RSS36 electronic safety sensor with unique diagnosis ...
Description:
The RSS36 electronic safety sensor with unique diagnosis meets the highest safety requirements, even when series-wired. It also features new coding functions for the uniform allocation of the actuator to the sensor, this is realised through the integrated RFID technology. ...
Configurable device capable of centralised monitoring of multiple ...
Description:
Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category ...