Ferrogard 440N Magnetic Safety Switch, Stainless Steel, 250 V ac

Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Ferrogard 13 & 14, Stainless Steel

The Ferrogard FRS 13 and 14 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Made from stainless steel with a slim rectangular housing to accommodate narrow mounting areas and sealed to IP68 (NEMA 6P), these non-contact switches are ideal for wet environments. They have two active sensing faces allowing more flexible mounting options.

Slim stainless steel housings
AC and DC operation
Auxiliary contact rating: 300Vdc/250Vac, 0.5A including in rush, 15VA/10W
When going dual channel, does not require 2 power reeds
Operating temperature range: -10 to +65°C
Actuator included
IP68 rating (NEMA 6P)

Standards

EN60947-5-1, EN1088, EN60204-1

//media.rs-online.com/t_line/L537712-01.gif
Specificaties
Kenmerk Waarde
Supply Voltage 250 V ac
Safety Contacts NC
Housing Material Stainless Steel
Auxiliary Contacts NC
Range Ferrogard
Series 440N
IP Rating IP67
Actuator Included Yes
Safety Category 1
Length 90mm
Dimensions 90 x 19 x 16 mm
Depth 16mm
Sensor Principle Magnetic
Actuator Type Magnetic
Width 19mm
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
34 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
154,00
(excl. BTW)
186,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 154,00
Related Products
The Sipha S1 is a non-contact switch in ...
Description:
The Sipha S1 is a non-contact switch in a miniature ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. ...
The design of the Sipha S4 non-contact switch ...
Description:
The design of the Sipha S4 non-contact switch incorporates several magnetically sensitive elements which must be triggered in a particular sequence to operate correctly. The sensor is designed for use with its own actuator, helping prevent defeat by means of ...
Description:
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the ...
The design of the Sipha S4 non-contact switch ...
Description:
The design of the Sipha S4 non-contact switch incorporates several magnetically sensitive elements which must be triggered in a particular sequence to operate correctly. The sensor is designed for use with its own actuator, helping prevent defeat by means of ...