BNS260 Magnetic Safety Switch, Plastic, 24 V dc

  • RS-stocknr. 617-5223
  • Fabrikantnummer BNS 260-02/01ZG-ST-L
  • Fabrikant Schmersal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

BNS 260, Miniature Coded

Smallest design
Actuation only possible with BPS260, available separately
Left-hand or right-hand side versions for door-mounting
Control category up to 4 to EN954-1
IP67 protection
Connector 8 mm, 6-pole, latching interlocking
Dimensions: L13 x W26 x H36 mm

Note

Actuating magnet not included, see accessories, for example 617-5374//617-5380

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS260), magnet (BPS260) and a safety monitoring module (AES) is used.

Standards

IEC/EN60947-5-3, BG-GS-ET-14

Note

Actuating magnet not included, see accessories

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS260), magnet (BPS260) and a safety monitoring module (AES) is used.

Standards

IEC/EN60947-5-3, BG-GS-ET-14

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Connection Type M8
Switch Type Safety
Series BNS260
Switching Distance 5 mm, 15 mm
IP Rating IP67
Actuator Included No
Dimensions 52 x 36 x 13 mm
Length 52mm
Safety Category 4
Actuator Type Coded
Depth 13mm
Width 36mm
Sensor Principle Magnetic
32 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
65 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
62,26
(excl. BTW)
75,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 62,26
Related Products
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...
Substitutes door handle and safety switch in one ...
Description:
Substitutes door handle and safety switch in one IP67 rated unit, no further door fittings requiredIdeal for small and light movable guards (rotating doors max. 5kg, sliding doors max. 3kg) Tamper-proof due to integral coded safety sensorControl category up to ...
The PSEN cs2.2p safety switch is fully coded ...
Description:
The PSEN cs2.2p safety switch is fully coded and the coding is unique which means it will only switch with the supplied actuator. If the actuator/switch is lost or broken, you will need to buy a new set. Series connection ...
Just one safety switch is sufficient for applications ...
Description:
Just one safety switch is sufficient for applications up to Cat 4 of EN954-1 - saving on wiringPossible to provide protection against defeat in accordance with VDE 060 by concealing the installationSimplified installation and adjustmentFor use in EX area Category ...