PSENmag Magnetic Safety Switch, Plastic, 24 V dc

  • RS-stocknr. 619-2789
  • Fabrikantnummer 540200
  • Fabrikant Pilz
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

PSENcode Large Non-Contact Switch, Unique Coded

The PSEN cs2.2p safety switch is fully coded and the coding is unique which means it will only switch with the supplied actuator. If the actuator/switch is lost or broken, you will need to buy a new set.

Series connection - you can connect more than 10 safety switches in sequence to Cat 4 of EN954-1
Unique assignment of switch and its actuator. They are coded only to each other for their operational life
5 directions of actuation
M12 connection, 8-pin

Note

When the safety gate is closed the switch provides 2 N/C semiconductor outputs.

Caution

EN60947-5-3 standard is only met if entire system consisting of safety switch (PSENcode), actuator (PSENcode) and a safety monitoring module (PNOZ X or PNOZmulti) is used

Standards

EN954-1 (Cat 4), EN60204-1, EN60947-5-3

Approvals

BG, cUL, CCC

Supplied with

Actuator

Approvals

BG, cUL, CCC

Caution

EN60947-5-3 standard is only met if entire system consisting of safety switch (PSENcode), actuator (PSENcode) and a safety monitoring module (PNOZ X or PNOZmulti) is used

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Series PSENmag
Switching Distance 15 mm
IP Rating IP67
Actuator Included Yes
Dimensions 75 x 40 x 40 mm
Sensor Principle Magnetic
Depth 40mm
Length 75mm
Safety Category 4
Number of Approach Directions 5
Housing Colour White
Width 40mm
Actuator Type Unique Coded, Uniquely Coded
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
192,78
(excl. BTW)
233,26
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 192,78
Related Products
With no need for a separate safety relay ...
Description:
With no need for a separate safety relay this device saves space in the cabinet with no loss of functionality and is easy to install. provides Cat 3//4 or SIL 2//3 protection on moveable machine guards or where frequent washdown ...
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...
Substitutes door handle and safety switch in one ...
Description:
Substitutes door handle and safety switch in one IP67 rated unit, no further door fittings requiredIdeal for small and light movable guards (rotating doors max. 5kg, sliding doors max. 3kg) Tamper-proof due to integral coded safety sensorControl category up to ...
The PSEN cs1.1p safety switch (stock no. 918-6689) ...
Description:
The PSEN cs1.1p safety switch (stock no. 918-6689) is coded and switches with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.The PSEN cs2.13p safety switch ...