PSENmag Magnetic Safety Switch, Plastic, 24 V dc

  • RS-stocknr. 619-2818
  • Fabrikantnummer 504220
  • Fabrikant Pilz
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CH
Productomschrijving

Pilz Non-contact Switch

The Pilz PSENmag series non-contact safety switch has an assured switching distance of 8mm. It has 2NO safety contact. It meets the highest safety requirements and offers a complete solution that is safe and economical.
Supplied with actuator
Caution:
EN60947-5-3 standard is only met if the entire system consisting of a safety switch (PSENmag), an actuator (PSENmag) and a safety-monitoring module (PNOZ X) is used.
Note:
Only stock nos. 744-8702 and 824-4918 have an LED.

Features and Benefits

Input The supply voltage is 24VDC
Connected via a plug connection or with cable
Flexible cable outlet, including connector, so there is no need for an angled connector
Flexible mounting, both the sensor and actuator support every conceivable mount configuration
Cost effective because of the series connection
Operating distance of 3mm or 10mm
Extra signal contact
Connection type is M8, 4-pin male
Housing material is PBT
Operating temperature ranges between -10°C and 55°C

Applications

Heavy soiling

Certifications

IP65 rated
IP67 rated
EN954-1 (Cat 4)
EN60204-1
EN60947-5-3
CE certified
UL approved
TÜV certified
BG certified
CCC certified

Approvals

BG, cUL, CCC

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NO
Housing Material Plastic
Connection Type M8
Switch Type Square
Range PSENmag
Switching Distance 8 mm, 12 mm
IP Rating IP67
Actuator Included Yes
Safety Category 4
Sensor Principle Magnetic
Width 26mm
Dimensions 42.8 x 26 x 13 mm
Housing Colour Yellow
Actuator Type Magnetic
Depth 13mm
Length 42.8mm
193 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
301 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
56,80
(excl. BTW)
68,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 56,80
Related Products
These safety interlock switches have dual restoration springs, ...
Description:
These safety interlock switches have dual restoration springs, easy to connect terminals and are available with a variety of contact arrangement and terminal type combinations. Typical applications for these safety interlock switches include office equipment and home appliances. Durability of ...
The Bernstein AG magnetic switch has redundancy by ...
Description:
The Bernstein AG magnetic switch has redundancy by NO and NC contact. It provides coded units which have a magnetic switch with the corresponding magnet. The NO and NC contact of the transducer unit is evaluated and monitored by a ...
The Siemens 3SE6 series non-contact safety switch has ...
Description:
The Siemens 3SE6 series non-contact safety switch has 16mm safe operating distance when OFF and 11mm safe operating distance when ON. This coded RFID switch has a rectangular housing and is available ready to use without any programming required or ...
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...