BNS33 Magnetic Safety Switch, Plastic, 24 V dc

  • RS-stocknr. 623-3133
  • Fabrikantnummer BNS 33-11ZG-2M
  • Fabrikant Schmersal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

BNS 33, Standard Coded

Control category up to 4 to EN954-1 in combination with a safety monitoring module
LED versions are illuminated when guard door is open
1 N/O 2 N/C versions can use 1 N/C as coded output to another device e.g. a beacon
Coded switch, actuation only possible with BPS33 actuating magnet
IP67 protection

Note

Actuator must be ordered separately, please see stock number 198-7863

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS33), magnet (BPS33) and a safety monitoring module (AES) is used.

Standards

IEC/EN60947-5-3, BG-GS-ET-14

//media.rs-online.com/t_line/L623312-01.gif

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS33), magnet (BPS33) and a safety monitoring module (AES) is used.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Connection Type Cable
Series BNS33
IP Rating IP67
Actuator Included No
Sensor Principle Magnetic
Safety Category 4
Length 88mm
Dimensions 88 x 50 x 13 mm
Depth 13mm
Actuator Type Coded
Housing Colour Black
Width 25mm
26 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
102 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
34,79
(excl. BTW)
42,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 34,79
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...
The Ferrogard FRS 1, 2, 20 and 21 ...
Description:
The Ferrogard FRS 1, 2, 20 and 21 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from ...
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...