MC1 440N Magnetic Safety Switch, Plastic

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DO
Productomschrijving

MC1, Coded

Non-contact actuation
Magnetic coded sensing
High tolerance to misalignment
2 N/C reed safety outputs
Switching current: 200 mA @ 24Vdc
IP67 protection rating
Category 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems

Standards

EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC60947- 5-1, IEC/EN60947-5-3, ANSI B11.19, AS4024.1

Specificaties
Kenmerk Waarde
Housing Material Plastic
Range MC1
Terminal Type Cable
Series 440N
IP Rating IP67
Actuator Included Yes
Depth 12mm
Length 48mm
Safety Category 4
Actuator Type Coded
Width 25mm
Housing Colour Red
Sensor Principle Magnetic
Dimensions 48 x 25 x 12 mm
26 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
50,30
(excl. BTW)
60,86
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 50,30
Related Products
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...
Different types of coded magnetic switchesManipulation safety by ...
Description:
Different types of coded magnetic switchesManipulation safety by multi-codingRedundance by NO and NC contactsCannot be operated with conventional magnets3, 6 and 9 m cable or connector versionsSturdy plastic enclosuresSwitching distances 3 or 4 mm, depending on typeNO contact and NC ...
The Sipha S1 is a non-contact switch in ...
Description:
The Sipha S1 is a non-contact switch in a miniature ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. ...
The design of the Sipha S4 non-contact switch ...
Description:
The design of the Sipha S4 non-contact switch incorporates several magnetically sensitive elements which must be triggered in a particular sequence to operate correctly. The sensor is designed for use with its own actuator, helping prevent defeat by means of ...