F3S-TGR-N_C Magnetic Safety Switch, Plastic, 24 V dc

  • RS-stocknr. 757-9250
  • Fabrikantnummer F3S-TGR-NMPC-21-05
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

F3S-TGR Non Contact Safety Switch

The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a long sensing range to avoid false signals resulting from an ill aligned door, for example.

Non-contact equals no abrasion which means no particles
Excellent coverage of mechanical tolerances
Can operate behind stainless steel fittings
Screw hole covers

F3S-TGR-N_C Switch

Connect up to 3 switches in series
LED for easy diagnosis
Electronic output (potential-free optocoupler output)
IP67 protection

F3S-TGR-N_R Switch

Connect up to 6 switches in series
Reed contacts
IP67 protection

Note

Models F3S-TGR-N_C are coded.
Actuator is included.
For suitable controller see the G9SA or G9SB from Omron, or the NE1A DeviceNet system.

Standards

EN standards certified by TÜV Rheinland, EN 954-1, EN ISO 13849-1, EN 60204-1, EN/IEC 60947-5-3, UL 508, CSA C22.2, BS 5304, EN 1088-1 conformance.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NC/NO
Housing Material Plastic
Connection Type 5m cable
Switch Type Rectangular
Terminal Type Pre-Wired
Series F3S-TGR-N_C
Switching Distance 12 mm
IP Rating IP67
Actuator Included Yes
Actuator Type Coded
Number of Approach Directions 2
Length 36mm
Safety Category 4
Dimensions 36 x 26 x 13 mm
Depth 13mm
Width 26mm
Sensor Principle Magnetic
Housing Colour Black
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
22 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
85,60
(excl. BTW)
103,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 85,60
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
the Str1 transponder safety switch has monitored semiconductor ...
Description:
the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with ...
Eden - Adam and Eva from ABB is ...
Description:
Eden - Adam and Eva from ABB is a non-contact safety sensor for use on interlocked gates, hatches etc. A coded signal is transmitted from the control device Vital or from the safety PLC Pluto via Adam to Eva which ...
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...