Telemecanique Sensors Safety Switch, IP66, IP67

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

XCS-DMR Coded Magnetic Safety Switches, Cylindrical

The Schneider XCS-DMR coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm.

1 approach direction
8mm tolerance to misalignment
LED versions have an LED in series with one N/C giving indication when guard is closed
Coded reed technology - switch cannot be totally defeated by a simple magnet
Cylindrical plastic housing
Dimensions: Ø30 x 38.5mm
Available pre-cabled or with connector on flying lead
IP66/67 protection in accordance with EN/IEC 60529
ROHS compliant

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Standards

IEC 947-1; EN 547-5-1; EN 547-5-3; EN 60204-1; EN 1088.

Approvals

UL, CSA.

Specificaties
Kenmerk Waarde
Switch Type Magnetic Proximity
Length 38.5mm
Dimensions 30 (Dia.) x 38.5 mm
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
57,30
(excl. BTW)
69,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 57,30
Related Products
The Schmersal BNS33 series safety sensor has switch ...
Description:
The Schmersal BNS33 series safety sensor has switch ON distance of 8mm and switch OFF distance of 18mm. It has a black thermoplastic enclosure and can be concealed mounted as well. This switch has 1 normally open contact and 2 ...
The Schmersal BNS33S series non-contact safety switch has ...
Description:
The Schmersal BNS33S series non-contact safety switch has a safe switch ON distance ranging between 8mm and switch OFF distance of 18mm. This switch has 1NO and 2NC contacts. It has a stainless steel rectangular enclosure.Note:The actuator must be ordered ...
The Schmersal BNS16 series non-contact safety switch has ...
Description:
The Schmersal BNS16 series non-contact safety switch has a safe switch ON distance of 8mm and switch OFF distance of 18mm. This switch has 1NO and 2NC contacts. It has a black thermoplastic enclosure and can be concealed mounted as ...
The Pilz PSENmag series non-contact safety switch has ...
Description:
The Pilz PSENmag series non-contact safety switch has an assured switching distance of 8mm. It has 2NO safety contact. It meets the highest safety requirements and offers a complete solution that is safe and economical.Supplied with actuatorCaution: EN60947-5-3 standard is ...