Cylindrical safety switch,5m,2NO 1NO

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

XCS-DMR Coded Magnetic Safety Switches, Cylindrical

The Schneider XCS-DMR coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm.

1 approach direction
8mm tolerance to misalignment
LED versions have an LED in series with one N/C giving indication when guard is closed
Coded reed technology - switch cannot be totally defeated by a simple magnet
Cylindrical plastic housing
Dimensions: Ø30 x 38.5mm
Available pre-cabled or with connector on flying lead
IP66/67 protection in accordance with EN/IEC 60529
ROHS compliant

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Standards

IEC 947-1; EN 547-5-1; EN 547-5-3; EN 60204-1; EN 1088.

Approvals

UL, CSA.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Switch Type Magnetic Proximity
Range Preventa
Series XCS-DMR
Switching Distance 8 mm
IP Rating IP66, IP67
Actuator Included Yes
Safety Category 4
Number of Approach Directions 1
Sensor Principle Magnetic
Actuator Type Coded
Dimensions 30 (Dia.) x 38.5 mm
Length 38.5mm
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
65,60
(excl. BTW)
79,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 65,60
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
Bistable, motor-driven systemClamping force 10.000 NRelease possible against ...
Description:
Bistable, motor-driven systemClamping force 10.000 NRelease possible against lateral forces up to 300 NPL e / cat. 4 / SIL 3 for interlocking and guard locking functionTwo-channel input signal of the guard locking functionOperation on P/P- and P/N-switching outputsHigh tolerance ...
the Str1 transponder safety switch has monitored semiconductor ...
Description:
the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with ...
Different types of coded magnetic switchesManipulation safety by ...
Description:
Different types of coded magnetic switchesManipulation safety by multi-codingRedundance by NO and NC contactsCannot be operated with conventional magnets3, 6 and 9 m cable or connector versionsSturdy plastic enclosuresSwitching distances 3 or 4 mm, depending on typeNO contact and NC ...