RE13 Magnetic Safety Switch, Plastic, 30 V dc

  • RS-stocknr. 797-4863
  • Fabrikantnummer RE13-SA05
  • Fabrikant Sick
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

SICK RE1 & RE2 Series of Non-Contact Safety Switches

RE1 & RE2 magnetic safety switches are equipped with NC/NO contacts or equivalent N/O contacts which are treated directly with coded magnetic actuators. These types of safety system switches are particularly useful in areas where there may be a high level of contamination (these units are simple to clean and keep high hygiene standards).

Features and Benefits

• Response range from 7-9 mm.

• Magnetic sensor principle.

• Built-in LED response indicator.

• Performance level up to PL e / Cat. 4 (EN ISO 13849).

• Glass-fibre reinforced PPS rectangular housing.

• High tolerances for door misalignment.

• 2-3 contacts (see specifications).

• Enclosure rating IP67 (IEC 60529).

Typical applications

The RE1&2 series are compatible anywhere where a high standard of hygiene is necessary for operations. Typically, you'll find these types of safety switches where precise guidance of a safety door isn't always possible.

• Monitoring of safety doors & removable guards.

• Applications requiring a high standard of hygiene.

Note

The actuators are only coded in the sense that they have an identical magnetic combination making them type specific not individual example specific.

Specificaties
Kenmerk Waarde
Supply Voltage 30 V dc
Safety Contacts 2NO
Housing Material Plastic
Connection Type M8
Switch Type Rectangular
Terminal Type Cable
Series RE13
Switching Distance 7 (On) mm, 20 (Off) mm
IP Rating IP67
Supply Current 100 mA
Actuator Included Yes
Width 26.2mm
Depth 13mm
Length 36mm
Safety Category 4
Actuator Type Magnetic
Number of Approach Directions 3
Dimensions 36 x 26.2 x 13 mm
Sensor Principle Magnetic
43 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
61 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
41,10
(excl. BTW)
49,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 41,10
Related Products
The Bernstein AG safety switch is an M12 ...
Description:
The Bernstein AG safety switch is an M12 connector coded magnetic switch. It has a corresponding magnet forms the transducer units for the controllers. The NC and NO contacts of the transducer units are evaluated and monitored by the magnetic ...
Control category up to 3 to EN954-1Output function ...
Description:
Control category up to 3 to EN954-1Output function indicated at rear of switch by LEDIP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm.
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
Mounting dimensions identical to best-selling AZ163 cable entries ...
Description:
Mounting dimensions identical to best-selling AZ163 cable entries M20 x 1.5IP67 protectionControl category up to 4 to EN954-1Suitable for food processing industryDimensions: L39 x W52 x H90 mm.