IN4000 Inductive Safety Switch, Plastic, 24 V dc

  • RS-stocknr. 797-4898
  • Fabrikantnummer IN40-D0101K
  • Fabrikant Sick
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

IN4000 Inductive Safety Switch

The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not require a separate coded actuator. Due to the non-contact form of operation, this safety switch is straight forward to adjust and install and offers increased resistance to shock and vibration. The response range of the sensor is monitored spatially and over time, providing increased protection against tampering.

Features

One pulsed output (IN4000 Standard) or two OSSD outputs (IN4000 Direct) for direct connection of sensors to a single safety controller
IP67 or IP69K enclosure rating
Response range of up to 15mm
LED status indicator
Up to performance level PL e / Cat. 4 (EN ISO 13849)
Safe series connection of sensors possible (IN4000 Standard)
Flexi Loop-compatible M12 plug connector

Benefits

Fast diagnostics via LED status indicator
Cascade up to 9 sensors to one controller for reduced costs (IN4000 Standard)
Flexi Loop now enables a safe series connection with enhanced diagnostic capabilities and minimal wiring effort (IN4000 Direct)
Long service life due to durable and low-maintenance design
Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849)
The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards

Safety Limit Switch

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 3NO
Housing Material Plastic
Connection Type M12
Switch Type Cuboid
Terminal Type 4-Pin M12 Connector
Series IN4000
Switching Distance 15 (On) mm, 30 (Off) mm
IP Rating IP67
Actuator Included No
Width 40mm
Depth 66mm
Dimensions 40 x 40 x 66 mm
Length 40mm
Safety Category 4
Sensor Principle Inductive
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 08-11-2019, met een levertijd van 1 werkdag.
Prijs Each
134,00
(excl. BTW)
162,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 134,00
Related Products
The L41 is a type 4 (IEC61496) cascadable ...
Description:
The L41 is a type 4 (IEC61496) cascadable single-beam photoelectric safety switch comprising of a sender and a receiver. The correct function of the L41 can be checked with the aid of the test input on the sender. Integrated testing ...
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
Just one safety switch is sufficient for applications ...
Description:
Just one safety switch is sufficient for applications up to Cat 4 of EN954-1 - saving on wiringPossible to provide protection against defeat in accordance with VDE 060 by concealing the installationSimplified installation and adjustmentFor use in EX area Category ...