IN4000 Inductive Safety Switch, Stainless Steel, 24 V dc

  • RS-stocknr. 797-4908
  • Fabrikantnummer IN40-D0202K
  • Fabrikant Sick
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

IN4000 Inductive Safety Switch

The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not require a separate coded actuator. Due to the non-contact form of operation, this safety switch is straight forward to adjust and install and offers increased resistance to shock and vibration. The response range of the sensor is monitored spatially and over time, providing increased protection against tampering.

Features

One pulsed output (IN4000 Standard) or two OSSD outputs (IN4000 Direct) for direct connection of sensors to a single safety controller
IP67 or IP69K enclosure rating
Response range of up to 15mm
LED status indicator
Up to performance level PL e / Cat. 4 (EN ISO 13849)
Safe series connection of sensors possible (IN4000 Standard)
Flexi Loop-compatible M12 plug connector

Benefits

Fast diagnostics via LED status indicator
Cascade up to 9 sensors to one controller for reduced costs (IN4000 Standard)
Flexi Loop now enables a safe series connection with enhanced diagnostic capabilities and minimal wiring effort (IN4000 Direct)
Long service life due to durable and low-maintenance design
Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849)
The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards

Safety Limit Switch

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 3NO
Housing Material Stainless Steel
Connection Type M12
Switch Type Cylindrical
Terminal Type 4-Pin M12 Connector
Series IN4000
Switching Distance 12 (On) mm, 30 (Off) mm
IP Rating IP67
Actuator Included No
Safety Category 4
Sensor Principle Inductive
Dimensions M30 x 80 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
132,00
(excl. BTW)
159,72
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 132,00
Related Products
The JSHD series from ABB Jokab offers the ...
Description:
The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series ...
Operated by deflection of the telescopic antenna which ...
Description:
Operated by deflection of the telescopic antenna which forces disconnection of the safety contacts and makes the alarm contactsThe unit is supplied set for 39° of movement.Chrome plated brass 6-stage telescopic antenna is connected to the actuator head by a ...
Mounting details to EN 50041Plunger style actuator12 N ...
Description:
Mounting details to EN 50041Plunger style actuator12 N actuating forceMetal enclosureSnap action with constant contact pressure up to switching pointActuator heads can be repositioned by 4 x 90°Good resistance to oil and petroleum spirit1 cable entry M20 x 1.5Includes EX-certified ...
The 3SE5 4 series limit switch has a ...
Description:
The 3SE5 4 series limit switch has a compact design and a metal enclosure making it deal for use in harsh environments or on equipment with limited space. The 3SE5 413 switch complies with the EU standard and features a ...