IN3000 Inductive Safety Switch, Stainless Steel, 24 V dc

  • RS-stocknr. 797-4917
  • Fabrikantnummer IN30-E0306K
  • Fabrikant Sick
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

IN3000 Direct Inductive Safety Switch

The IN3000 direct inductive safety switch is used for position monitoring and works on a non-contact basis. The unique inductive sensor is activated by metal (e.g. ST37 steel) and therefore doesn't need a separate actuator. These safety switches can be connected directly to a suitable electronic evaluation system such as a safe control solution. The small design of the switch makes optimum integration into the machine design possible. The IN3000 is a cost-effective solution for position monitoring and combines the benefits of a small housing with easy and direct evaluation. The wide response range of this safety switch makes it simple to mount and adjust.

Features

Inductive safety switch with cylindrical M18 or M30 plastic/metal housing
Two outputs for direct connection of sensors to a single safety controller
Enclosure rating IP65 or IP67
Response range of up to 15mm
Sensor with LED status indicator
Up to performance level PL d (EN ISO 13849), SILCL2 (EN 62061), SIL2 (IEC 61508)
M12 plug connector

Benefits

Cost-effective solution for applications up to PL d / SILCL2
Space-saving mounting thanks to the small design and direct integration into the machine design
Easy and direct connection to a safe control solution
Fast diagnosis via LED status indicator
Long service life due to resistance to shocks and vibrations
Easy to clean, application in extremely dirty areas also possible

Safety Limit Switch

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Stainless Steel
Connection Type M12
Switch Type Cylindrical
Series IN3000
IP Rating IP65, IP67
Actuator Included No
Sensor Principle Inductive
Safety Category 2
13 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
105,00
(excl. BTW)
127,05
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 105,00
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...
Magnet switches designed for mounting on movable protective ...
Description:
Magnet switches designed for mounting on movable protective guards such as covers, flaps and doors.Suitable for areas where cleaning, disinfecting or contamination is involvedIP67 ratedFor a suitable safety relay, use 528-0908Effective operating distance 5-15mmFor a suitable coded magnet use stock ...
Eden - Adam and Eva from ABB is ...
Description:
Eden - Adam and Eva from ABB is a non-contact safety sensor for use on interlocked gates, hatches etc. A coded signal is transmitted from the control device Vital or from the safety PLC Pluto via Adam to Eva which ...